{"title":"EVERYTHING","description":"","products":[{"product_id":"mushroom-mold-2-x-2-x-25-keychain-mold-magnet-mold","title":"Mushroom Mold | 2” x 2” x .25”| Keychain Mold, Magnet Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeight: 2”\u003c\/p\u003e\n\u003cp\u003eWidth: 2”\u003c\/p\u003e\n\u003cp\u003eDepth: .25”\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to create a Mushroom shape used for magnets, keychains, or earrings.  Each mold comes with 6 cavities allowing you to create more at a time.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS..\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742930833633,"sku":"MUSHGRIP-22-25","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Mushroom_grip.png?v=1760131903"},{"product_id":"square-keychain-mold-1-5-1-75-2-magnet-mold-hair-clip-mold","title":"Square Keychain Mold | 1.5”, 1.75”, 2” | Magnet Mold, Hair Clip Mold |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall: 1.5”\u003c\/p\u003e\n\u003cp\u003eMedium: 1.75”\u003c\/p\u003e\n\u003cp\u003eLarge: 2”\u003c\/p\u003e\n\u003cp\u003eDepth: .25”\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a silicone mold to create a square shape used for phone grips, magnets, and keychains! Each mold comes with 6 cavities allowing you to create more at a time.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 1 1\/2\"","offer_id":42779769176289,"sku":"SQGRIPSM-27","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Medium - 1 3\/4\"","offer_id":42779769209057,"sku":"SQGRIPMED","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Large - 2\"","offer_id":42779769241825,"sku":"SQGRIPLG-27","price":18.0,"currency_code":"USD","in_stock":true},{"title":"*DEAL* ALL 3 BUNDLE","offer_id":42779769274593,"sku":"SQGRIPBUNDLE-27","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Square_grips.png?v=1760131748"},{"product_id":"round-ornament-mold","title":"Round Ornament Mold | 3\/8\" or 1\/2\" | Ornament Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeight: 5\"\u003c\/p\u003e\n\u003cp\u003eCircle Portion: 4\"\u003c\/p\u003e\n\u003cp\u003eDepth: 3\/8\" or 1\/2\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Round Ornament Mold. This ornament mold is a best seller! \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"3\/8\" Thick","offer_id":43857286463713,"sku":"3\/8ORN7","price":12.5,"currency_code":"USD","in_stock":true},{"title":"1\/2\" Thick","offer_id":43857286496481,"sku":"1\/2ORN7","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_18317b6d-30fd-4c13-bf94-b4757d3c172b.png?v=1736374485"},{"product_id":"rectangle-dish-mold-trinket-dish-mold-dish-mold-small-rectangle-tray-mold","title":"Rectangle Mold | 4”x 3” | Jewelry Dish Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLength: 4”\u003c\/p\u003e\n\u003cp\u003eWidth: 3”\u003c\/p\u003e\n\u003cp\u003eDeep: 3\/4”\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a rectangle mold to create a beautiful rectangle shaped resin dish with angled corners. PLEASE NOTE: The rooster shown on the dish is lightly etched on the mold. Other crafters say that it isn't noticeable on your finished piece.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742932275425,"sku":"ROOST","price":22.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/rooster_dish_shopify.png?v=1741554711"},{"product_id":"coffin-tray-silicone-mold-sizes-4x7-5x9-7x13","title":"Coffin Tray Silicone Mold | Sizes - 4\"x7\", 5\"x9\", 7\"x13\" |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSmall: 4\"x7\"\u003cbr\u003eMedium: 5\"x9\"\u003cbr\u003eLarge: 7\"x13\"\u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\u003cbr\u003e\u003cbr\u003eThis listing is for a silicone mold to create a coffin shaped tray. The tray comes in 3 sizes. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 4\"x7\"","offer_id":42742933618913,"sku":"COF47-78","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Medium - 5\"x9\"","offer_id":42742933717217,"sku":"COF59","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Large - 7\"x13\"","offer_id":42742933749985,"sku":"COF713","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/coffin_tray_shopify_1.png?v=1741313561"},{"product_id":"rectangle-tray-silicone-mold-sizes-4x6-6x8-8x10-5x13-9x13-rolling-tray-molds","title":"Rectangle Tray Mold | Sizes - 4\"x6\", 6\"x8\", 8\"x10\", 5\"x13\", 9\"x13\" |","description":"\u003cp\u003e\u003cstrong\u003eDIMENSIONS ORIGINAL STYLE \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSizes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e 4\" x 6\"\u003cbr\u003e6\" x 8\"\u003cbr\u003e8\" x 10\"\u003cbr\u003e5\" x 13\"\u003cbr\u003e9\" x 13\"\u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDIMENSIONS NEW \u0026amp; IMPROVED STYLE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e4\" x 6\"\u003cbr\u003e6\" x 8\"\u003c\/p\u003e\n\u003cp\u003eRim Height: 3\/8\"\u003cbr\u003eRim Width: 3\/8\"\u003cbr\u003eRim Base: 3\/8\"\u003cbr\u003eOverall Height: 3\/4\"\u003cbr\u003eAll Edges Rounded\u003c\/p\u003e\n\u003cp\u003eThis listing is for Rectangle Tray Mold. We have 5 different sizes of this tray to meet your needs. They are approximately 4\" x 6\", 6\" x 8\", 8\" x 10\", 5\" x 13\" or 9\" x 13\" and it's approximately 5\/8\" deep. The base is 1\/4\" thick and the walls are 3\/8\" thick.\u003c\/p\u003e\n\u003cp\u003eWe have added a new and improved version on two of our most popular trays. 4\" x 6\" and 6\" x 8\".  All edges are rounded and the base is slightly larger.  These Tray Molds will produce a product that is smooth and glossy on all sides!! Inside and Outside!!  There will be no lines in your finished product from stacking acrylic. \u003c\/p\u003e\n\u003cp\u003e*** PLEASE NOTE: The Silicone color for your mold may be different then what is pictured.  This does not affect the quality of the mold.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Original Style \/ 4x6","offer_id":42742934962401,"sku":"REC46-97","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Original Style \/ 6x8","offer_id":42742934995169,"sku":"REC68-71","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Original Style \/ 8x10","offer_id":42742935027937,"sku":"REC810-88","price":80.0,"currency_code":"USD","in_stock":true},{"title":"Original Style \/ 9x13","offer_id":42742935060705,"sku":"REC913-87","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Original Style \/ 5x13","offer_id":42742935093473,"sku":"REC513-90","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Rounded Edges\/Smooth Sides \/ 4x6","offer_id":45517685915873,"sku":"NEWREC46","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Rounded Edges\/Smooth Sides \/ 6x8","offer_id":45517685948641,"sku":"NEWREC68","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_7883afc7-4607-4aa6-a472-f2e7d570915c.png?v=1740955507"},{"product_id":"ghost-3-dimensional-body-mold-for-resin-crafting-2-sizes-high-gloss-finish-shiny-mold-silicon-mould-shiney-figure-figurine","title":"Ghost Molds for Resin | 4 Styles | Ghost 3D Molds, Halloween Mold","description":"\u003cp\u003eSMALL ROUNDED GHOST: 1 3\/4\" Tall by 1 1\/2\" Wide\u003cbr\u003eLARGE ROUNDED GHOST: 2 1\/2\" Tall by 2\" Wide\u003cbr\u003eTALL GHOST: 3\" Tall by 1\" wide\u003cbr\u003eSHORT GHOST: 1 3\/4\" Tall by 1 1\/4\" Wide\u003cbr\u003e\u003cbr\u003eThis listing is for Ghost Molds for Resin. These are available in 3 styles. All ghosts have the eyes etched in them. These ghosts are a perfect addition to your Halloween decor. \u003cbr\u003e\u003cbr\u003eThe New Rounded Ghosts do not have a split. The Tall Ghost also does not have a split. (It used to but not any more :) They are easy to demold.\u003cbr\u003e\u003cbr\u003eThe Short ghost mold come presplit for easy demolding of your resin piece. Use the rubber band provided to aid in sealing the split before pouring. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eResin work: @Artworkbyjennyshlemon\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003eS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small Rounded Ghost","offer_id":44041314238689,"sku":"GHOSTROUNDSM","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Large Rounded Ghost","offer_id":44041314271457,"sku":"GHOSTROUNDLG","price":22.5,"currency_code":"USD","in_stock":true},{"title":"Small Ghost","offer_id":42742935191777,"sku":"GHOSTSM","price":19.99,"currency_code":"USD","in_stock":true},{"title":"Tall Ghost","offer_id":42742935224545,"sku":"GHOSTLG","price":22.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_c52fa282-c5de-4b05-93ff-436c66e2dc92.png?v=1740759042"},{"product_id":"picture-frame-with-optional-stand-silicone-mold-4x6-5x7-and-8x10-photos","title":"Picture Frame with optional Stand Silicone Mold - 4x6\", 5x7\", and 8x10\" Photos","description":"\u003cp\u003e\u003cstrong\u003eFRAME PHOTO SIZES AVAILABLE \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e4\" X 6\"\u003c\/b\u003e\u003cbr\u003e\u003cb\u003e5\" X 7\"\u003c\/b\u003e\u003cbr\u003e\u003cb\u003e8\" X 10\"\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to create a Picture frame. The picture frame mold comes in three different sizes, each one for a different photo size. The frames can be hung from the wall, they can be used with the small stands offered, or they can be used with the easel mold we offer! Each picture from can be used landscape or portrait. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4x6 Picture \/ No Stand","offer_id":42742935257313,"sku":"FRME46NONE-5","price":35.0,"currency_code":"USD","in_stock":true},{"title":"4x6 Picture \/ Small Stand - 2 Pair","offer_id":42742935290081,"sku":"FRME46SMLL2-5","price":45.0,"currency_code":"USD","in_stock":true},{"title":"4x6 Picture \/ Easle Stand","offer_id":42742935322849,"sku":"FRME46ESLE-5-4","price":55.0,"currency_code":"USD","in_stock":true},{"title":"5x7 Picture \/ No Stand","offer_id":42742935355617,"sku":"FRME57NONE-5","price":42.5,"currency_code":"USD","in_stock":true},{"title":"5x7 Picture \/ Small Stand - 2 Pair","offer_id":42742935421153,"sku":"FRME57SMLL2-5","price":52.5,"currency_code":"USD","in_stock":true},{"title":"5x7 Picture \/ Easle Stand","offer_id":42742935453921,"sku":"FRME57ESLE-5-4","price":62.5,"currency_code":"USD","in_stock":true},{"title":"8x10 Picture \/ No Stand","offer_id":42742935486689,"sku":"FRME810NONE-7","price":70.0,"currency_code":"USD","in_stock":true},{"title":"8x10 Picture \/ Small Stand - 2 Pair","offer_id":42742935519457,"sku":"FRME810SMLL2-7","price":80.0,"currency_code":"USD","in_stock":true},{"title":"8x10 Picture \/ Easle Stand","offer_id":42742935552225,"sku":"FRME810ESLE-7-4","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/teal_frame_molds_shopify.png?v=1762125608"},{"product_id":"hair-clip-silicone-mold-multiple-designs-barette-diy-hair-accessory-artbyjennyshlemon-collab","title":"Hair Clip Mold | 6 Styles | Barrette Resin Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST\u003c\/strong\u003e \u003cstrong\u003eDIMENSION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLength: 2.7\"\u003c\/p\u003e\n\u003cp\u003eWidth: Varies\u003c\/p\u003e\n\u003cp\u003eDepth: 1\/4\"\u003c\/p\u003e\n\u003cp\u003eSurface Finish: Smooth\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Hair Clip Mold. We offer this mold in 6 different styles:\u003cbr\u003e\u003cbr\u003e* Solid Teardrop\u003cbr\u003e* Teardrop with Center Cutout\u003cbr\u003e* Scalloped Teardrop with Center Cutout\u003cbr\u003e* Solid Rectangle\u003cbr\u003e* Rectangle with Center Cutout\u003cbr\u003e* Bar\u003cbr\u003e\u003cbr\u003eEach mold will have 4 of the same design on them.  You will use the resin pieces created from this mold and attach it to a metal hair clip. Giving the top of the clip a beautiful design, which will be shown beautifully in hair.\u003cbr\u003e\u003cbr\u003eGold hair clips CAN BE PURCHASED for $.50 Each! We have two different styles that will work perfectly with the molds!\u003cbr\u003e\u003cbr\u003eMold Collab and Resin pieces done by\/with @ArtworkbyJennyShlemon\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Teardrop Solid","offer_id":42742936240353,"sku":"TEARSOLID-34","price":11.0,"currency_code":"USD","in_stock":true},{"title":"Teardrop w\/ Hole","offer_id":42742936273121,"sku":"TEARHOLE-34","price":11.0,"currency_code":"USD","in_stock":true},{"title":"Teardrop Scalloped","offer_id":42742936305889,"sku":"TEARSCALLOP-34","price":11.0,"currency_code":"USD","in_stock":true},{"title":"Rectangle Solid","offer_id":42742936338657,"sku":"RECTSOLID-34","price":11.0,"currency_code":"USD","in_stock":true},{"title":"Rectangle w\/ Hole","offer_id":42742936371425,"sku":"RECTHOLE-34","price":11.0,"currency_code":"USD","in_stock":true},{"title":"Bar","offer_id":42742936404193,"sku":"BAR-34","price":11.0,"currency_code":"USD","in_stock":true},{"title":"Set of 6 Molds*DEAL*","offer_id":42742936436961,"sku":"HAIRSET6-34","price":52.0,"currency_code":"USD","in_stock":true},{"title":"Hair Clip-Water Drop(NOT THE MOLD)","offer_id":42742936469729,"sku":"CLIPWATERDROP-34","price":0.5,"currency_code":"USD","in_stock":true},{"title":"Hair Clip-Long Strip(NOT THE MOLD)","offer_id":42742936502497,"sku":"CLIPSTRIP-34","price":0.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/hair_clip_shopify.png?v=1740747246"},{"product_id":"silicone-split-pouring-cups-with-dividers-for-resin-acrylic-paint-pouring-3-sizes","title":"Silicone Split Pouring Cups with Dividers for Resin\/Acrylic Paint Pouring, 3 SIZES","description":"\u003cp\u003eThis listing is for a silicone pouring cup for resin\/acrylic paint\/soap. These cups come with your choice of 2, 3 or 4 compartments. These pouring cups are made out of durable high-quality Silicone which means this cup will be easy to clean and last awhile! The beauty of using silicone is the ease of reusing the cups. Resin can be easily removed once it has cured in the cup. Allowing for many, many uses. Acrylic paints will also easily peel off once dried or you can rinse the paints out when you're done! These cups have been designed so that your resin\/paint will pour evenly from the spout allowing you to create beautiful designs with multiple colors. These silicone cups are easy to hold, and the walls of the silicone are thick enough to make it sturdy.\u003cbr\u003e\u003cbr\u003eThe best way to hold the cups is from the bottom as that is the sturdiest spot!\u003cbr\u003e\u003cbr\u003eThese cups may be purchase individually or as a bundle of all 3.\u003cbr\u003e\u003cbr\u003eThese cups are available in 3 sizes! Small Medium and Large\u003cbr\u003e\u003cbr\u003eSMALL\u003cbr\u003eHolds approximately 1 oz of liquid\u003cbr\u003eSize of cup is 2.25\" x 1.75\" and is 1\" tall\u003cbr\u003e\u003cbr\u003eMEDIUM\u003cbr\u003eHolds approximately 3 oz of liquid\u003cbr\u003e3.5\" x 2.75\" and is 1.5\" tall\u003cbr\u003e\u003cbr\u003eLARGE\u003cbr\u003eHolds approximately 8 oz of liquid\u003cbr\u003e4.5\" x 3.5\" and is 2\" tall\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"2 SLOT SMALL","offer_id":42742936699105,"sku":"POUR2SM","price":12.49,"currency_code":"USD","in_stock":true},{"title":"3 SLOT SMALL","offer_id":42742936731873,"sku":"POUR3SM","price":12.49,"currency_code":"USD","in_stock":true},{"title":"4 SLOT SMALL","offer_id":42742936764641,"sku":"POUR4SM","price":12.49,"currency_code":"USD","in_stock":true},{"title":"2,3,4 SLOT SM BUNDLE","offer_id":42742936797409,"sku":"POURBDLSM","price":24.99,"currency_code":"USD","in_stock":true},{"title":"2 SLOT MEDIUM","offer_id":42742936830177,"sku":"POUR2MED","price":14.99,"currency_code":"USD","in_stock":true},{"title":"3 SLOT MEDIUM","offer_id":42742936862945,"sku":"POUR3MED","price":14.99,"currency_code":"USD","in_stock":true},{"title":"4 SLOT MEDIUM","offer_id":42742936895713,"sku":"POUR4MED","price":14.99,"currency_code":"USD","in_stock":true},{"title":"2,3,4 SLOT MD BUNDLE","offer_id":42742936928481,"sku":"POURBDLMED","price":34.99,"currency_code":"USD","in_stock":true},{"title":"2 SLOT LARGE","offer_id":42742936961249,"sku":"POUR2LG","price":17.49,"currency_code":"USD","in_stock":true},{"title":"3 SLOT LARGE","offer_id":42742936994017,"sku":"POUR3LG","price":17.49,"currency_code":"USD","in_stock":true},{"title":"4 SLOT LARGE","offer_id":42742937026785,"sku":"POUR4LG","price":17.49,"currency_code":"USD","in_stock":true},{"title":"2,3,4 SLOT LG BUNDLE","offer_id":42742937059553,"sku":"POURBDLLG","price":44.99,"currency_code":"USD","in_stock":true},{"title":"ALL 9 CUPS BUNDLE","offer_id":42742937092321,"sku":"POURALLCUPS","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Split_pour_cups.png?v=1761156073"},{"product_id":"frog-silicone-mold-4-sizes","title":"Frog Silicone Mold | 4 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMini:\u003c\/strong\u003e 1\" long, .75\" wide, 1\" tall - Matte Finish\u003cbr\u003e\u003cstrong\u003eSmall:\u003c\/strong\u003e 1.25\" long, 1\" wide, 1 1\/4\" tall - Semi Gloss Finish\u003cbr\u003e\u003cstrong\u003eMedium\u003c\/strong\u003e: 1.75\" long, 1\" wide, 1 1\/3\" tall - Glossy Finish (ORIGINAL SIZE)\u003cbr\u003e\u003cstrong\u003eLarge:\u003c\/strong\u003e 2\" long, 1 3\/4\" wide, 1 3\/4\" tall - Glossy Finish (Different Style)\u003cbr\u003e\u003cbr\u003eThis listing is for a Frog Mold. We offer this mold in the 4 sizes shown above. This frog would be so cute stand alone or would also make a great addition to your tray or dish. The NEW large size frog mold is a little different style from the other 3 and has more room for flowers or inclusions.\u003cbr\u003e\u003cbr\u003ePlease note the different finishes shown above for each mold.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003ePhotos and Resin Work done by @mlcresindesigns\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Mini","offer_id":43764699693281,"sku":"FROGMINI","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Small","offer_id":43764699726049,"sku":"FROGSMALL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Medium","offer_id":43764699758817,"sku":"FROG","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":44009447456993,"sku":"FROGLARGE","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/frog_shopify.png?v=1754685847"},{"product_id":"notebook-cover-silicone-mold-for-resin-3-sizes-a5-a6-a7-mould-shiney-note-cover-book-cover","title":"Notebook Mold | 3 Sizes, A5, A6, A7 |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA5 Size - ~8\"x6\" (Large)\u003cbr\u003eA6 Size - ~4\"x7\" (Medium)\u003cbr\u003eA7 Size - ~3.5\"x5\" (Small)\u003c\/p\u003e\n\u003cp\u003eDepth: 1\/4\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Notebook Mold with holes for the binding rings. These Resin Notebook Cover Molds are offered in 3 sizes. A5 Binder, A6 Binder, and A7 Binder. These are all 1\/4\" deep which gives you more room to work with compared to the cheap ones. The holes are elongated as well to better fit the binder rings! All accessories can be found on amazon, links are below!\u003cbr\u003e\u003cbr\u003eBinder Rings -https:\/\/amzn.to\/3vnVLTm\u003cbr\u003e\u003cbr\u003eA5 Paper - https:\/\/amzn.to\/3aIDpTA\u003cbr\u003eA6 Paper - https:\/\/amzn.to\/3FIYn2K\u003cbr\u003eA7 Paper - https:\/\/amzn.to\/3p628tp\u003cbr\u003e\u003cbr\u003eResin work done by @artworkbyjennyshlemon\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"A7 - Small","offer_id":42891956158689,"sku":"A7SMALL2P-64","price":19.0,"currency_code":"USD","in_stock":true},{"title":"A6 - Medium","offer_id":42891956191457,"sku":"A6MEDIUM2P-64","price":25.0,"currency_code":"USD","in_stock":true},{"title":"A5 - Large","offer_id":42891956224225,"sku":"A5LARGE2P-63-65","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_d08ff79a-1dd5-471f-addd-eb10c6cf68ee.png?v=1740749303"},{"product_id":"bowl-silicone-mold-for-resin-4-x-1-5","title":"BOWL Silicone Mold for Resin | 4\" x 1.5\" |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBowl Height: 1 1\/2\"\u003cbr\u003eInside Depth: 1 1\/8\"\u003cbr\u003eDiameter: 3 7\/8\"\u003cbr\u003eWall Thickness: 3\/16\"\u003cbr\u003e\u003cbr\u003eThis listing is for a Bowl Silicone Mold for Resin.\u003cbr\u003e\u003cbr\u003eNOTE: This mold is not perfect. Some surface imperfections may be present.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message  and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742939123937,"sku":"BOWL","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/bowl_shopify.png?v=1741553571"},{"product_id":"cloud-tray-silicone-mold","title":"Cloud Tray Molds | 2 Styles | Cloud Mold for Resin","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eFlat Bottom Cloud: 6\" x 10\"\u003cbr\u003ePuffy Cloud: 7\" x 10\"\u003c\/p\u003e\n\u003cp\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003cbr\u003e\u003cbr\u003eThis listing is for a silicone mold to create a cloud rolling tray. We offer 2 Styles.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cure. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Puffy Cloud","offer_id":42771506921697,"sku":"PUFFCLOUDTRAY-72","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Flat Cloud","offer_id":42771507118305,"sku":"FLATCLOUDTRAY-72","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/cloud_tray_shopify.png?v=1741395350"},{"product_id":"bookmark-silicone-mold","title":"Bookmark Silicone Mold | 4 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003eLength: 8\" Square Corners\u003cbr\u003eWidth: 1 1\/2\"\u003cbr\u003eThickness: 1\/8\"\u003cbr\u003e\u003cbr\u003eLength: 8\" Square Corners\u003cbr\u003eWidth: 1 1\/2\"\u003cbr\u003eThickness: 1\/4\"\u003c\/p\u003e\n\u003cp\u003eLength: 5 1\/4\" Square Corners\u003cbr\u003eWidth: 1 1\/4\"\u003cbr\u003eThickness:  1\/4\"\u003cbr\u003e\u003cbr\u003eLength: 5 1\/4\" Rounded Top \u0026amp; Bottom \u003cbr\u003eWidth: 1 1\/4\"\u003cbr\u003eThickness: 1\/4\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Bookmark Mold! It comes in 2 length options, 2 thickness options and 2 shapes.\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eResin work by @artworkbyjennyshlemon\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"8\" Long \u0026 1\/8\" Thick","offer_id":46548630765793,"sku":"BOOKMARK1\/8-10","price":9.0,"currency_code":"USD","in_stock":true},{"title":"8\" Long \u0026 1\/4\" Thick","offer_id":46548630798561,"sku":"BOOKMARK1\/4-9","price":12.5,"currency_code":"USD","in_stock":true},{"title":"5 1\/4\" Long \u0026 1\/4\" Thick - Square Corners","offer_id":47483187822817,"sku":"BOOKMARK5.25SQUARE-9","price":10.0,"currency_code":"USD","in_stock":true},{"title":"5 1\/4\" Long \u0026 1\/4\" Thick - Rounded","offer_id":47483187855585,"sku":"BOOKMARK5.25ROUND-9","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_85317b94-a99b-4e14-a1a7-43b7b8cd7126.png?v=1763587978"},{"product_id":"butterfly-keychain-mold-1-5-1-75-2-magnet-mold-hair-clip-mold","title":"Butterfly Keychain Mold | 1.5\", 1.75\", 2\" | Magnet Mold, Hair Clip Mold","description":"\u003cp\u003e\u003cstrong\u003eDIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSmall: 2 3\/8\" x 1 1\/2\"\u003cbr\u003eMedium: 2 3\/4\" x 1 3\/4\"\u003cbr\u003eLarge: 3 1\/8\" x 2\"\u003cbr\u003eThickness: 1\/4\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis listing is for a silicone mold to create a Butterfly used for hair clips, magnets, keychains or earrings. Each mold comes with 6 cavities allowing you to create more at a time.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small","offer_id":42802911183073,"sku":"BUTGRIPSM-30","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Medium","offer_id":42802911215841,"sku":"BUTGRIPMED-25","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":42802911248609,"sku":"BUTGRIPLG-30","price":18.0,"currency_code":"USD","in_stock":true},{"title":"*DEAL* ALL 3 BUNDLE","offer_id":42802911281377,"sku":"BUTGRIPBUNDLE-25-30","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Butterfly_grip.png?v=1760131518"},{"product_id":"tray-molds-rounded-edges-pill-tray-mold-oval-tray-mold-circle-tray-mold-rectangle-tray-mold","title":"Tray Molds | Rounded Edges | Pill Tray Mold, Oval Tray Mold, Circle Tray Mold, Rectangle Tray Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall Pill Tray: 4\" x 6\"\u003cbr\u003eLarge Pill Tray: 4\" x 9\"\u003cbr\u003eSmall Oval Tray: 4\" x 6\"\u003cbr\u003eLarge Oval Tray: 6\" x 8\"\u003cbr\u003eSmall Rectangle Tray: 4\" x 6\"\u003cbr\u003eLarge Rectangle Tray: 6\" x 8\"\u003cbr\u003eSmall Circle Tray: 5\"\u003cbr\u003eLarge Circle Tray: 7\"\u003c\/p\u003e\n\u003cp\u003eRim Height: 3\/8\"\u003cbr\u003eRim Width: 3\/8\"\u003cbr\u003eRim Base: 3\/8\"\u003cbr\u003eOverall Height: 3\/4\"\u003cbr\u003eAll Edges Rounded\u003c\/p\u003e\n\u003cp\u003eSurface Finish:  Smooth and Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for our Improved Tray Molds.  We've taken the shapes that you love and made them even better. All edges of this tray will be rounded giving it a softer look.  It offers a thicker base of 3\/8\" plus a slightly increased rim width. This gives you extra room to work with.  These Tray Molds will produce a product that is smooth and glossy on all sides!! Inside and Outside!!  There will be no lines in your finished product from stacking acrylic.   This is an ULTRA QUALITY MOLD!\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003c\/p\u003e\n\u003cp\u003e**Please note this listing is for the silicone mold ONLY.  \u003c\/p\u003e\n\u003cp\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small Pill Tray Mold","offer_id":45361359290593,"sku":"NEWPILL7","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Large Pill Tray Mold","offer_id":45361359323361,"sku":"NEWPILL9","price":40.0,"currency_code":"USD","in_stock":true},{"title":"Small Oval Tray Mold","offer_id":45361359356129,"sku":"NEWOVAL46","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Large Oval Tray Mold","offer_id":45361359388897,"sku":"NEWOVAL68","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Small Circle Tray Mold","offer_id":45361359421665,"sku":"NEWCIRC5","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Large Circle Tray Mold","offer_id":45361359454433,"sku":"NEWCIRC7","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Small Rectangle Tray Mold","offer_id":45361359487201,"sku":"NEWREC46","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Large Rectangle Tray Mold","offer_id":45361359519969,"sku":"NEWREC68","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/improved_tray_molds.png?v=1760910733"},{"product_id":"round-keychain-mold-1-25-1-5-1-75-2-circle-mold-magnet-mold-earring-mold","title":"Round Keychain Mold | 1.25”, 1.5”, 1.75”, 2” | Circle Mold, Magnet Mold, Earring Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall: 1 1\/4\"\u003cbr\u003eMedium: 1 1\/2\"\u003cbr\u003eLarge: 1 3\/4\"\u003cbr\u003eExtra Large: 2\"\u003cbr\u003eDEPTH: 1\/4\"\u003cbr\u003e\u003cbr\u003eThis listing is for a Round Circle Mold. This can be also used as a Round Keychain Mold, Circle Grip Mold, Earrings Mold or Magnet Mold. Each mold comes with 6 cavities allowing you to create more at a time. The size and shape of the 1.75\" circle is perfect to fit over any phone grip. This allows you to customize the phone grip to your liking! \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 1.25\"","offer_id":42833567383777,"sku":"CIRCGRIP125-27","price":14.0,"currency_code":"USD","in_stock":true},{"title":"Medium - 1.5\"","offer_id":42833567416545,"sku":"CIRCGRIP15-27","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Large - 1.75\"","offer_id":42833567449313,"sku":"CIRCGRIP175-29","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Extra Large - 2\"","offer_id":42833567482081,"sku":"CIRCGRIP2-27","price":18.0,"currency_code":"USD","in_stock":true},{"title":"*DEAL* ALL 4 SIZES","offer_id":42833567514849,"sku":"CIRCGRIPBDL-27-29","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Circle_grips.png?v=1760131319"},{"product_id":"star-ashtray-silicone-mold-for-resin","title":"Star Ashtray Silicone Mold for Resin","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eHeight: 5\"\u003cbr\u003eWidth: 3\"\u003cbr\u003eDepth: 1\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to create a Star Ashtray. The final product comes out completely shiny.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742941352161,"sku":"STARASH","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/star_ashtray_shopify.png?v=1753800986"},{"product_id":"heart-tray-silicone-mold-sizes-5-7-9","title":"Heart Tray Molds | 3 Sizes - 5\", 7\" \u0026 9” |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eSmall:  5\"x6\"\u003cbr\u003eMedium: 7\"x8\"  \u003cbr\u003eLarge: 9\" x 10.5\"\u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003c\/p\u003e\n\u003cp\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a Heart Tray Mold. This Heart Mold comes in three sizes.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 5\"x6\"","offer_id":42742941450465,"sku":"HRT5-93","price":38.0,"currency_code":"USD","in_stock":true},{"title":"Medium - 7\"x8\"","offer_id":42742941483233,"sku":"HRT7-93","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Large - 9\"x10.5\"","offer_id":42742941516001,"sku":"HRT9-93","price":77.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/heart_tray_shopify.png?v=1740946565"},{"product_id":"moon-flat-shiny-silicone-mold-for-resin-crafting-wall-hanging-coaster-mould-shiney","title":"Moon FLAT Mold | 6\"x8\", 8\"x10\" | Flat Molds","description":"\u003cp\u003eDIMENSIONS:\u003cbr\u003e\u003cbr\u003eMedium: 6\" x 8\"\u003cbr\u003eLarge: 8\" x 10\"\u003cbr\u003eDepth: 3\/8\"\u003cbr\u003e\u003cbr\u003eThis listing is for a silicone mold to create a Moon Flat mold. These flats are perfect for wall hangings anything else you can think of!\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Medium - 6x8","offer_id":42742941384929,"sku":"MOON68FLAT-49","price":27.0,"currency_code":"USD","in_stock":true},{"title":"Large - 8x10","offer_id":42742941417697,"sku":"MOON810FLAT-49","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/moon_flat_shopify.png?v=1740694956"},{"product_id":"adorable-cat-mold-sculpt-3d-silicone-mold-for-resin-crafting-shiny-shiney-silicon-mould-shiny-mold-glossy","title":"Cat Mold | 3 Styles | 3D Cat Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003eSitting Cat: 2\" Tall, 1.25\" Long, 1\" Wide\u003cbr\u003eTiny Sleeping Cat: .5\" Tall, 1\" Long, .5\" Wide \u003cbr\u003eLarge Sleeping Cat: 1\" Tall, 2\" Long, 1 3\/4\" Wide\u003cbr\u003e\u003cbr\u003eThis listing is for a Cat Mold. We offer this 3D Cat Mold in 3 Styles. \u003cbr\u003e\u003cbr\u003eThe sitting cat mold comes presplit to aid in demolding of your resin piece. Use the rubber band provided to align and seal the split before pouring your resin.\u003cbr\u003e\u003cbr\u003eThis listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eResin work: @Artworkbyjennyshlemon\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Sitting Cat","offer_id":42742941745377,"sku":"SITCAT","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Tiny Sleeping Cat","offer_id":42742941778145,"sku":"SLEEPCATTINY","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Large Sleeping Cat","offer_id":43901310271713,"sku":"SLEEPCATLG","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/cat_molds_shopify.png?v=1741210755"},{"product_id":"artist-paint-palette-shiny-silicone-mold-handmade-painting-tray-oval-paint-mold-drawing-board-casting-mold-for-resin-makeup-palette-mold","title":"Palette Mold | 4 Sizes | Artist Palette Mold","description":"\u003cp\u003e\u003cstrong\u003eSIZES:\u003c\/strong\u003e\u003cbr\u003e3.5\" x 5\" - MINI\u003cbr\u003e5\" x 7\" - SMALL\u003cbr\u003e6.5\" x 9\" - MEDIUM\u003cbr\u003e8\" x 11\" - LARGE\u003cbr\u003eThickness: 1\/4\"\u003cbr\u003e\u003cbr\u003eThis listing is for a Palette Mold. This Artist Palette Mold for Resin creates a paint palette that is easy to hold with the convenient thumb hole. You have a choice of 4 sizes for these palettes. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"MINI - 3.5X5","offer_id":42742942236897,"sku":"PAL.MINI-55","price":12.99,"currency_code":"USD","in_stock":true},{"title":"SMALL - 5X7","offer_id":42742942269665,"sku":"PAL.SM-46","price":16.99,"currency_code":"USD","in_stock":true},{"title":"MEDIUM - 6.5X9","offer_id":42742942302433,"sku":"PAL.MED-55","price":20.99,"currency_code":"USD","in_stock":true},{"title":"LARGE - 8X11","offer_id":42742942367969,"sku":"PAL.LG-55","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_2423da14-a5ab-4b5a-b149-396d2fdc3ac0.png?v=1749243378"},{"product_id":"flower-tray-silicone-mold-daisy-2-styles-daisy-mold","title":"Flower Tray Silicone Mold | Daisy - 2 Styles | Daisy Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDiameter: Daisy 1 - 6 1\/2\"\u003cbr\u003eDaisy 2 - 5 1\/2\"\u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003cbr\u003e\u003cbr\u003eThis listing is for a silicone mold to create a Daisy tray. This tray comes with 2 options. DAISY1 has non symmetrical petals which means the petals are of a slightly different size\/shape.  DAISY2 has symmetrical petals meaning all the petals are exactly the same. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"DAISY1","offer_id":42742942433505,"sku":"DAISY1irreg-92","price":29.99,"currency_code":"USD","in_stock":true},{"title":"DAISY2","offer_id":42742942466273,"sku":"DAISY2even-92","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/daisy_tray_shopify.png?v=1741397951"},{"product_id":"pot-leaf-silicone-tray-mold-sizes-5-5-8-10-rolling-tray-mold","title":"Pot Leaf Tray Mold | Sizes - 5.5\", 8\", 10\" | Weed Tray Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSION\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSizes: 5.5\", 8\", 10\"\u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003cbr\u003e\u003cbr\u003eThis listing is for a Pot Leaf Tray Mold. This Leaf Tray Mold comes in 3 sizes. Small is 5.5\", Medium is 8\" and Large is 10\" It is approximately 5\/8\" deep. The base is 1\/4\" thick and the walls are 3\/8\" thick. \u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"6”","offer_id":42742942531809,"sku":"WEED6-97","price":29.99,"currency_code":"USD","in_stock":true},{"title":"8”","offer_id":42742942564577,"sku":"WEED8-100","price":44.99,"currency_code":"USD","in_stock":true},{"title":"10”","offer_id":42742942597345,"sku":"WEED10-100","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/weed_tray_shopify.png?v=1741399800"},{"product_id":"crystal-ball-faceted-sphere-super-shiney-silicone-mold-for-resin-crafting-candles-table-decor-shiney-silicon-mould-shiny-mold-glossy","title":"Sphere Silicone Mold, Self Standing, Faceted Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDiameter: 4\"\u003c\/p\u003e\n\u003cp\u003eHeight: 3.5\"\u003c\/p\u003e\n\u003cp\u003eFlat Bottom: 1\" in Diameter\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Sphere Silicone Mold.\u003c\/p\u003e\n\u003cp\u003eThis is a DEEP mold. Please check your resin's maximum thickness to avoid an exothermic reaction.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe sphere mold comes presplit to aid in demolding of your resin piece. Use the rubber band provided to align and seal the split before pouring your resin.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003eOur Smoothon Mold Star silicone molds cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fareheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742943088865,"sku":"FACETEDSPHERE","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_d023b865-8c7d-4d2d-89bf-4c932a857d10.png?v=1736644301"},{"product_id":"ashtray-molds-for-resin-octagon-mold","title":"Ashtray Molds for Resin, Octagon Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eHeight: 4.5\u003cbr\u003eWidth: 4.5\"\u003cbr\u003eDepth: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for an Ashtray Mold. The shape of it is an Octagon. The final product comes out completely shiny. The flat inner surface is perfect for placing foils or images!\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742943154401,"sku":"OCTASH","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/octagon_ashtray_shopify.png?v=1753798518"},{"product_id":"goddess-body-shape-mold-for-resin-3d-body-mold-female-body-mold-3d-candle-mold","title":"Female Torso Mold, 7 Sizes, Goddess Mold","description":"\u003cp\u003e\u003cstrong\u003eSIZES:\u003c\/strong\u003e\u003cbr\u003e-1.75”\u003cbr\u003e-2.5”\u003cbr\u003e-4”\u003cbr\u003e-5”\u003cbr\u003e-6\"\u003cbr\u003e-7\"\u003cbr\u003e-8\"\u003cbr\u003e\u003cbr\u003eThis listing is for Female Torso Mold. This Goddess Mold is currently available in 7 sizes. These molds are great for multiple uses. The smaller ones are perfect for keychains or earrings. The larger ones for displaying. They are perfect for resin inclusions. These molds can be used with wax for candles.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e All torso molds come presplit for easy demolding of your resin piece. Use the rubber bands provided to aid in sealing the split before pouring.\u003cbr\u003e\u003cbr\u003ePlease use caution when pouring the 5”, 6\", 7\" and 8\" molds as pouring in one go can cause an exothermic reaction which will ruin the mold. Please follow your specific resin instructions when pouring deep molds. \u003cbr\u003e\u003cbr\u003eThese molds can be used with wax.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"1.75” Tall","offer_id":42742943219937,"sku":"GOD175","price":15.0,"currency_code":"USD","in_stock":true},{"title":"2.5” Tall","offer_id":42742943252705,"sku":"GOD25","price":20.0,"currency_code":"USD","in_stock":true},{"title":"4” Tall","offer_id":42742943285473,"sku":"GOD4","price":30.0,"currency_code":"USD","in_stock":true},{"title":"5” Tall","offer_id":42742943318241,"sku":"GOD5","price":40.0,"currency_code":"USD","in_stock":true},{"title":"6” Tall","offer_id":42742943351009,"sku":"GOD6","price":55.0,"currency_code":"USD","in_stock":true},{"title":"7\" Tall","offer_id":42742943383777,"sku":"GOD7","price":70.0,"currency_code":"USD","in_stock":true},{"title":"8\" Tall","offer_id":42742943416545,"sku":"GOD8","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_3b37dd37-c600-45de-b4eb-64ee28b7da64.png?v=1749155772"},{"product_id":"spiderweb-coaster-mold-set-4-5-halloween-mold","title":"Spiderweb Coaster Mold Set | 4.5\" | Halloween Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 4.5\"\u003cbr\u003eWidth: 4.5\"\u003cbr\u003eDeep: .25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Spider Web Coaster Set Mold with a stand! This set comes with 4 Spider web molds and an oval tray stand for when you want to display your coasters. \u003cbr\u003e\u003cbr\u003eThe image on the coaster is engraved which means it will come out matte. The image will also be recessed into your resin piece upon de-molding. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742943514849,"sku":"SPDRWEBCSTR-20-73","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/spider_web_coasters_shopify_1.png?v=1760111150"},{"product_id":"heart-keychain-mold-1-75x1-75x-25-hair-clip-mold-magnet-mold","title":"Heart Keychain Mold | 1.75\"x1.75\"x.25\" | Hair Clip Mold, Magnet Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeight: 1 3\/4”\u003c\/p\u003e\n\u003cp\u003eWidth at widest point: 1 3\/4”\u003c\/p\u003e\n\u003cp\u003eDepth: 1\/4”\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a silicone mold to create a heart used for magnets, hair clips or keychains. Each mold comes with 6 cavities allowing you to create more at a time.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742944334049,"sku":"HRTGRIP-23","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Heart_grip.png?v=1760131127"},{"product_id":"geode-tray-silicone-mold-sizes-4x6-6x8-9x13-rectangle-tray-mold","title":"Geode Tray Mold | Sizes - 4\"x6\", 6\"x8\", 9\"x13\" | Rectangle Tray Mold,","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSmall: 4\" x 6\" \u003cbr\u003eMedium: 6\" x 8\"\u003cbr\u003eLarge: 9\" x 13\"\u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003cbr\u003e\u003cbr\u003eThis listing is for a Geode Tray Mold. The Geode Mold is offered in 3 sizes. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns abo ut your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4x6","offer_id":42742944366817,"sku":"GEOREC46-74","price":30.0,"currency_code":"USD","in_stock":true},{"title":"6x8","offer_id":42742944399585,"sku":"GEOREC68-74","price":45.0,"currency_code":"USD","in_stock":true},{"title":"9x13","offer_id":42742944465121,"sku":"GEOREC913","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Geode_tray_shopify.png?v=1741398890"},{"product_id":"tooth-brush-holder-shiny-silicone-mold-for-resin-concrete-jesmonite-cement-crafting-bathroom-accessories-home-decor","title":"Toothbrush Holder Mold","description":"This listing is fora Toothbrush Holder. This holder has spots to hold 3 toothbrushes. The sides of the holder are large enough to put inclusions such as flowers or foils in your resin for a beautiful touch. The base is 3 1\/4\" x 5\" and 1\/2\" deep. The angled side pieces are 2 1\/4\" wide at the bottom and tapers to 1 3\/8\" at the top and are 1\/4\" thick. The top piece is 5\" x 1 1\/2\" and is 1\/4\" thick. The height of the assembled holder is 4 1\/4\". This is a great decor piece for your bathroom. This mold is perfect to use with resin, concrete or jesmonite.\u003cbr\u003e Please note the base of this come out where shiny surface is the bottom of the piece and may require doming to get desired affects.\u003cbr\u003e \u003cbr\u003e Please message us with any questions you may have regarding this mold.\u003cbr\u003e \u003cbr\u003e **Please note this listing is for the silicone mold ONLY. \u003cbr\u003e \u003cbr\u003e All molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e \u003cbr\u003e Our Smoothon Mold Star silicone molds cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e \u003cbr\u003e SILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e \u003cbr\u003e • DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e • Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e • USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e • Make sure the resin is fully. Uncured resin may rip the mold.\u003cbr\u003e • Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e • Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e • All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e • If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e \u003cbr\u003e PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742944563425,"sku":"TOOTH-6","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/products\/Copyofdivideddishorganizer.png?v=1656100496"},{"product_id":"organizer-tray-silicone-mold-rolling-tray-mold-rectangle-tray-mold","title":"Organizer Tray Mold | 6\" x 8\" | Divided Tray Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSizes: 6\" x 8\"\u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003c\/p\u003e\n\u003cp\u003eCircle Diameter: Approx. 3\"\u003cbr\u003e\u003cbr\u003eThis listing is for a Organizer Tray Mold. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742944727265,"sku":"RECORG68","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/organizer_tray_shopify.png?v=1741551094"},{"product_id":"triangle-tray-silicone-mold-sizes-4-6-8","title":"Triangle Tray Silicone Mold | Sizes - 4\", 6\", 8\" |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eLength: 4\", 6\", 8\" \u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis listing is for a silicone mold to create a Triangle tray. Also a feature added to this is a increased width of the rim the bigger size you get. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4\"","offer_id":42742944825569,"sku":"TRI4","price":39.99,"currency_code":"USD","in_stock":true},{"title":"6\"","offer_id":42742944891105,"sku":"TRI6","price":54.99,"currency_code":"USD","in_stock":true},{"title":"8\"","offer_id":42742944923873,"sku":"TRI8","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/triangle_tray_shopify.png?v=1741551527"},{"product_id":"square-coaster-mold-with-rim","title":"Square Coaster Mold with Rim","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003eOUTER DIMENSION: 4\" x 4\"\u003cbr\u003eINNER DIMENSIOIN: 3.5\" x 3.5\"\u003cbr\u003eDEPTH: 1\/2\"\u003c\/p\u003e\n\u003cp\u003eThis listing Square Coaster Mold with Rim! The overall outer dimension for this Coaster Mold is 4\"x4\" which includes the rim.  The inner dimension of the coaster is 3.5\"x3.5\"  The size of the rim is 1\/4\" tall and 1\/4\" wide.  The perfect size!  This mold is an amazing 1\/2\" deep. This mold has smooth and glossy sides.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742944956641,"sku":"RIMSQRCSTR1P-70","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/square_rim_coaster_shopify.png?v=1760120150"},{"product_id":"round-coaster-mold-with-rim-4-coaster","title":"Round Coaster Mold with Rim, 4\" Coaster","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eOuter Size: 4\"\u003cbr\u003eInner Size: 3.5\"\u003cbr\u003eDeep: 1\/2\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for Round Coaster Mold with Rim! The overall outer dimension of the Circle Coaster Mold for Resin is 4\" which includes the rim. The inner dimension of the coaster is 3.5\" The size of the rim is 1\/4\" tall and 1\/4\" wide. Perfect for a coaster. This mold has smooth and glossy sides. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742945022177,"sku":"RIMCIRCCSTR1P-70","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/round_rim_coaster_shopify.png?v=1760116052"},{"product_id":"diamond-tray-silicone-mold-sizes-5-7-9-11","title":"Diamond Tray Silicone Mold | Sizes - 5\", 7\", 9\" 11\"|","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSmall: 3\"x5\"\u003cbr\u003eMedium: 4\"x7\" \u003cbr\u003eLarge: 6\"x9\"\u003cbr\u003eExtra Large: 7\"x11\"\u003cbr\u003e\u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a silicone mold to create a diamond shaped tray.  The rim width increases with the size of the tray. The larger the tray; the larger the rim.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 3x5","offer_id":42742945186017,"sku":"DIA35","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Medium - 4x7","offer_id":42742945218785,"sku":"DIA47","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Large - 6x9","offer_id":42742945251553,"sku":"DIA69","price":49.99,"currency_code":"USD","in_stock":true},{"title":"Extra Large - 7x11","offer_id":42742945284321,"sku":"DIA711","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/DIAMOND_tray_shopify_1.png?v=1741397089"},{"product_id":"square-coaster-mold-4-inch-coaster-mold","title":"Square Coaster Mold, 4 inch Coaster Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003eLENGTH: 4\"\u003cbr\u003eWIDTH: 4\"\u003cbr\u003eDEPTH: 1\/2\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Square Coaster Mold!  This mold has smooth and glossy sides.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742948102369,"sku":"SQUARECOASTER","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/square_coaster_shopify.png?v=1760114994"},{"product_id":"christmas-ornaments-with-etched-phrases-shiny-silicone-mold-for-resin-crafting","title":"Ornament Silicone Molds, 11 Phrases, Christmas Ornament Molds","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeight: 5\"\u003c\/p\u003e\n\u003cp\u003eCircle Portion: 4\"\u003c\/p\u003e\n\u003cp\u003eDepth: 3\/8\" \u003c\/p\u003e\n\u003cp\u003eThis listing is for a wide variety of Ornament Silicone Molds! There are 11 unique Christmas phrases creatively etched on these ornaments. Choose the ones you like or buy all 11 at a nice discount. \u003cbr\u003eWe offer the following phrases on the ornaments:\u003cbr\u003e\u003cbr\u003e(A) Tis The Season to be Jolly\u003cbr\u003e(B) Peace on Earth\u003cbr\u003e(C) Merry and Bright\u003cbr\u003e(D) Home Sweet Home\u003cbr\u003e(E) Merry Christmas Y'All\u003cbr\u003e(F) Believe in the Magic of Christmas\u003cbr\u003e(G) Deck the Halls\u003cbr\u003e(H) Meet Me Under the Mistletoe\u003cbr\u003e(I) Have Yourself A Merry Little Christmas\u003cbr\u003e(J) It's The Most Wonderful Time of the Year\u003cbr\u003e(K)Joy to the World\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"(A) Season ToBeJolly","offer_id":42742961275105,"sku":"JOLLYORN-A","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(B) Peace on Earth","offer_id":42742961307873,"sku":"PEACEORN-B","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(C) Merry \u0026 Bright","offer_id":42742961340641,"sku":"BRIGHTORN-C","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(D) Home Sweet Home","offer_id":42742961373409,"sku":"HOMEORN-D","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(E) Christmas YAll","offer_id":42742961406177,"sku":"XMASYALLORN-E","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(F) Believe in Magic","offer_id":42742961438945,"sku":"MAGICORN-F","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(G) Deck the Halls","offer_id":42742961471713,"sku":"DECKORN-G","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(H) Meet Mistletoe","offer_id":42742961504481,"sku":"MISTLETOEORN-H","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(I) Little Christmas","offer_id":42742961537249,"sku":"LITTLEORN-I","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(J) Wonderful Time","offer_id":42742961570017,"sku":"YEARORN-J","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(K) Joy to the World","offer_id":42742961602785,"sku":"JOYORN-K","price":12.5,"currency_code":"USD","in_stock":true},{"title":"Set of 11 Ornaments","offer_id":42742961635553,"sku":"SET11ORN","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/ornaments_11_shopify.png?v=1740761645"},{"product_id":"mouse-mold-3d-resin-mold","title":"Mouse Mold, 3D Resin Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eHeight: 1\"\u003cbr\u003eWidth: 1\"\u003cbr\u003eLength: 1.5\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to make this cute little 3D Mouse. \u003cbr\u003e\u003cbr\u003eThis listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742961864929,"sku":"3DMOUSE","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/mouse_shopify.png?v=1754684248"},{"product_id":"bat-flat-shiny-silicone-mold-for-resin-crafting-2-sizes-wall-hanging-mould-shiney-fall-halloween-spooky-decor","title":"Bat Flat Molds | 5”, 10” | Vampire Bat Mold, Halloween Mold, Spooky Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall: 5”x3”\u003c\/p\u003e\n\u003cp\u003eLarge: 10” x 6”\u003c\/p\u003e\n\u003cp\u003eDepth: 3\/8”\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for Bat Flat Molds.  These flats are perfect for wall hangings, home decor or anything else you can think of!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 5x3","offer_id":42742962127073,"sku":"BATFLATSM-33","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Large - 10x6","offer_id":42742962159841,"sku":"BATFLATLG-33","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/BAT_FLAT_shopify.png?v=1740944143"},{"product_id":"square-tray-silicone-mold-sizes-4-6-8","title":"Square Tray Silicone Mold | Sizes - 4\", 6\", 8\" |","description":"\u003cp\u003e\u003cb\u003eFINAL CAST DIMENSIONS\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eSmall: 4\"x4\"\u003cbr\u003eMedium: 6\"x6\" \u003cbr\u003eLarge: 8\"x8\"\u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003cbr\u003e\u003cbr\u003eThis listing is for a silicone mold to create a Square tray. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 4\"","offer_id":42742964977889,"sku":"SQ4-91","price":39.99,"currency_code":"USD","in_stock":true},{"title":"Medium - 6\"","offer_id":42742965010657,"sku":"SQ6-91","price":54.99,"currency_code":"USD","in_stock":true},{"title":"Large - 8\"","offer_id":42742965043425,"sku":"SQ8-91","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/square_tray_shopify.png?v=1741486157"},{"product_id":"octagon-tray-silicone-mold-sizes-5-and-7","title":"Octagon Tray Mold | Sizes - 5\" and 7\" |","description":"\u003cp\u003e~DIMENSIONS~\u003cbr\u003e\u003cbr\u003eSmall: 5\" x 5\" \u003cbr\u003eMedium: 7\" x 7\" \u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003cbr\u003e\u003cbr\u003eThis listing is for an Octagon Tray Mold. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 5\" x 5\"","offer_id":42742966255841,"sku":"OCT5","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Medium - 7\" x 7\"","offer_id":42742966288609,"sku":"OCT7","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/octagon_tray_shopify.png?v=1741550071"},{"product_id":"coffin-flat-super-shiny-silicone-mold-for-resin-crafting-wall-decor-wall-hanging-fall-halloween-silicon-mould-shiney","title":"Coffin FLAT Mold | 4\"x7\", 5\"x9\" | Spooky Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSmall: 4\" x 7\" \u003cbr\u003eMedium: 5\" x 9\"\u003cbr\u003eDepth: 3\/8\"\u003cbr\u003e\u003cbr\u003eSurface Finish: Smooth\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a silicone mold to create a coffin flat. These flats are perfect for wall hangings, home decor, Halloween or anything else you can think of!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 4\"x7\"","offer_id":42742967140577,"sku":"COFFLAT47-48","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Medium - 5\"x9\"","offer_id":42742967173345,"sku":"COFFLAT59-48","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/coffin_flat_shopify.png?v=1740692959"},{"product_id":"irregular-tray-silicone-mold","title":"Irregular Tray Silicone Mold, Tray Mold | 8.25\" X 4.25\" | Polygon Tray Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003eLength: 8.25\" \u003cbr\u003eWidth: 4.25\" \u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis listing is for an irregular tray mold in a polygon shape. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message  and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742967238881,"sku":"POLYTRAY","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/irregular_tray_shopify.png?v=1741552020"},{"product_id":"doming-blocks-for-resin-art-epoxy-holds-your-resin-pieces-off-your-work-area","title":"Doming Blocks for Resin Art, Epoxy | 3 OPTIONS | Silicone Blocks, HDPE Blocks","description":"\u003cp\u003eWe offer the Doming Blocks in 3 options:\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e* Small block is 1\/2\" x 1\/2\" x 5\/8\"\u003cbr data-mce-fragment=\"1\"\u003e* Large Block is 1 1\/2\" x 2\" x 3\/4\"\u003cbr data-mce-fragment=\"1\"\u003e* HDPE Block is 1 1\/2\" x 2 1\/4\" x 3\/4\"\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003eYou are looking at doming blocks designed to lift your art off your work surface! These blocks work perfectly for all my molds! When it comes to trays they sit perfectly on the underside and also are tall enough if you flip your tray over that it will still keep your piece elevated. These can be used for my coasters and also all my smaller molds! You can purchase as many as you'd like, WE HAVE TONS OF THESE!\u003cbr\u003e\u003cbr\u003eThese work great in tandem with my silicone mats! Please go check them out. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eCLEANING: These can easily be cleaned by peeling off cured resin, using tape, and also running under water and wiping off the resin bits with your finger.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"5 Small Blocks","offer_id":42742967271649,"sku":"DOME5","price":2.5,"currency_code":"USD","in_stock":true},{"title":"10 Small Blocks","offer_id":42742967304417,"sku":"DOME10","price":5.0,"currency_code":"USD","in_stock":true},{"title":"20 Small Blocks","offer_id":42742967337185,"sku":"DOME20","price":10.0,"currency_code":"USD","in_stock":true},{"title":"1 Large Block","offer_id":42742967369953,"sku":"LGDOME1","price":1.5,"currency_code":"USD","in_stock":true},{"title":"4 Large Blocks","offer_id":42742967402721,"sku":"LGDOME4","price":6.0,"currency_code":"USD","in_stock":true},{"title":"1 HDPE Block","offer_id":46126579450081,"sku":"HDPE1","price":1.75,"currency_code":"USD","in_stock":true},{"title":"4 HDPE Blocks","offer_id":46126579482849,"sku":"HDPE4","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_546c4625-ad88-493c-a9f6-d92022226fb2.png?v=1736990827"},{"product_id":"easel-stand-shiny-silicone-mold-for-resin-crafting-picture-stand-silicon-mould-shiney","title":"Easel Stand Silicone Mold for Resin | 7\" x7\" |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eLength: 7\"\u003cbr\u003eWidth: 7\" when assembled\u003cbr\u003eDeep: 1\/4\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to create an Easel Stand. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742967566561,"sku":"LGEZL-4","price":27.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/easel_shopify.png?v=1740764243"},{"product_id":"starfish-mold-trinket-dish-mold","title":"Starfish Mold, Trinket Dish Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e5\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .75\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Starfish Mold or also called a Trinket Dish Mold for Resin. This is a one of a kind dish with the 3D starfish in the middle. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742967992545,"sku":"BLUSTAR","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Blue_Starfish_Dish_shopify.png?v=1762038234"},{"product_id":"ring-holder-mold-elephant-ring-holder-mold","title":"Ring Holder Mold, Elephant Ring Holder Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003eTall: 4.5\"\u003cbr\u003eLength: 2\"\u003cbr\u003eWidth: 1\"\u003cbr\u003eSuper Glossy Finish - High Quality\u003cbr\u003e\u003cbr\u003eThis listing is for an Elephant Ring Holder Mold. \u003cbr\u003e\u003cbr\u003ePlease note the elephant mold comes with one split down the side for easy demolding. The split is easy to seal. Use the rubber bands supplied to align and seal the split before pouring your resin.\u003cbr\u003e\u003cbr\u003eThis listing is for the silicone mold ONLY.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eBlack Elephant Resin Piece done by @craftycatgifts13\u003cbr\u003e\u003cbr\u003eClear Resin Piece done by @Mishy1971\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742969041121,"sku":"ELEPHANTRING","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/elephant_RING_HOLDER.png?v=1760711306"},{"product_id":"anchor-dish-silicone-mold-trinket-dish-mold","title":"Anchor Dish Silicone Mold, Trinket Dish Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e3.5\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 2.75\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .75\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to make an anchor shaped dish. What is great about this dish are the embedded anchor and rope lines on the dish to give it a realistic appearance.  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742969434337,"sku":"ANCH","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/anchor_mold_shopify.png?v=1762040537"}],"url":"https:\/\/zapp3ddesign.com\/collections\/everything.oembed?page=15","provider":"Zapp3D Design LLC","version":"1.0","type":"link"}