{"title":"Floral Video Ad","description":"","products":[{"product_id":"4x4x1-square-coaster-silicone-mold","title":"4\"x4\"x1\" Square Coaster Silicone Mold","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cbr\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eLength: 4\"\u003cbr\u003eWidth: 4\"\u003cbr\u003eThickness: 1\"\u003cbr\u003eSharp Corners\u003cbr\u003eGlossy\/Smooth\/Shiny Top + Sides\u003cbr\u003e\u003cbr\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message  and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742973268193,"sku":"SQ4X4X1","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/4x4x1_coaster.png?v=1753299132"},{"product_id":"2-deep-round-silicone-molds-12-sizes","title":"2\" Deep Round Silicone Molds, 12 Sizes","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSIZES AVAILABLE\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e\u003cbr\u003e4\"       8\"    \u003cbr\u003e10\"    12\"    \u003cbr\u003e14\"    15\"  \u003cbr\u003e16\"    18\"    \u003cbr\u003e20\"    24\" \u003cbr\u003e30\"   36\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e  2\"\u003cbr\u003e\u003cstrong\u003eSurface Finish:\u003c\/strong\u003e Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for 2\" Deep Round Silicone Molds.  We offer this mold in a variety of sizes.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4\"","offer_id":45881090769121,"sku":"CIRC4X2","price":40.0,"currency_code":"USD","in_stock":true},{"title":"8\"","offer_id":45881090801889,"sku":"CIRC8X2","price":55.0,"currency_code":"USD","in_stock":true},{"title":"10\"","offer_id":45881090834657,"sku":"CIRC10X2","price":75.0,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":45881090867425,"sku":"CIRC12X2","price":95.0,"currency_code":"USD","in_stock":true},{"title":"14\"","offer_id":45881090900193,"sku":"CIRC14X2","price":115.0,"currency_code":"USD","in_stock":true},{"title":"15\"","offer_id":45881090932961,"sku":"CIRC15X2","price":120.0,"currency_code":"USD","in_stock":true},{"title":"16\"","offer_id":45881090965729,"sku":"CIRC16X2","price":140.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":45881090998497,"sku":"CIRC18X2","price":166.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":45881091031265,"sku":"CIRC20X2","price":194.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":45881091064033,"sku":"CIRC24X2","price":255.0,"currency_code":"USD","in_stock":true},{"title":"30\"","offer_id":45881091096801,"sku":"CIRC8X12","price":462.0,"currency_code":"USD","in_stock":true},{"title":"36\"","offer_id":45881091129569,"sku":"CIRC36X2","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/2_tHICK_ROUNDS_a278f629-062b-4dd7-964c-8907ab64eca0.png?v=1753298236"},{"product_id":"4-x-1-round-coaster-silicone-mold","title":"4\" x 1\" Round Coaster Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eDiameter: 4\"\u003cbr\u003eThickness: 1\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a round coaster silicone mold\u003c\/p\u003e\n\u003cp\u003eResin work done by @resinforareason\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have.\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42743012786401,"sku":"CIRC4x1","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/4x1_round_coaster.png?v=1753298916"},{"product_id":"deep-arch-mold-7-sizes","title":"Deep Arch Mold | 7 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNARROW STYLE\u003c\/strong\u003e\u003cbr\u003eMINI: 3.5\" X 5\"\u003cbr\u003eSMALL: 5\" X 7\"\u003cbr\u003eMEDIUM: 6\" X 9\"\u003cbr\u003eLARGE: 8\" X 11\"\u003cbr\u003eDeep: 3\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWIDER STYLE\u003c\/strong\u003e\u003cbr\u003eSMALL: 5\" X 6\"\u003cbr\u003eMEDIUM: 7\" X 8\"\u003cbr\u003eLARGE: 9\" X 10\"\u003cbr\u003eDeep: 3\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSURFACE FINISH:\u003c\/strong\u003e SMOOTH \u0026amp; GLOSSY\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e*WALL STIFFENERS* are embedded into the silicone to make sure the silicone does not bow inwards or outwards. This is important to ensure your final result has straight sides.\u003c\/span\u003e\u003cbr\u003e** PLEASE NOTE: The 3.5\" x 5\" Mini Arch does not have wall stiffeners due to its size\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThis listing is for both shapes and all sizes of our arch molds.  We offer 2 different shapes - Narrow or Wide.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease message us with any questions you may have regarding this mold.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAll molds are handmade and inspected before shipping.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Mini - 3.5\" x 5\"","offer_id":43801930793185,"sku":"ARCH35","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Small - 5\"x7\"","offer_id":43700244283617,"sku":"ARCH57","price":115.0,"currency_code":"USD","in_stock":true},{"title":"Medium - 6\"x9\"","offer_id":43700244316385,"sku":"ARCH69","price":150.0,"currency_code":"USD","in_stock":true},{"title":"Large - 8\"x11\"","offer_id":43700244349153,"sku":"ARCH811","price":170.0,"currency_code":"USD","in_stock":true},{"title":"Wide Small - 5\" x 6\"","offer_id":45989172707553,"sku":"WIDEARCH65","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Wide Medium 7\" x 8\"","offer_id":45989175951585,"sku":"WIDEARCH87","price":150.0,"currency_code":"USD","in_stock":true},{"title":"Wide Large 9\" x 10\"","offer_id":45989179424993,"sku":"WIDEARCH109","price":170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Arch_comparison_2.png?v=1759853630"},{"product_id":"deep-standing-oval-mold-2-styles","title":"Deep Standing Oval Mold | 2 Styles |","description":"\u003cp\u003e\u003cstrong\u003eFLORAL PRESERVATION MOLDS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eHorizontal: 5\" Tall x 10\" Wide\u003cbr\u003eVertical: 10\" Tall x 5\" Wide\u003cbr\u003eDepth: 3\"\u003c\/p\u003e\n\u003cp\u003eSurface Finish: Glossy\/Smooth\u003cbr\u003e\u003cbr\u003eThis listing is for Deep Standing Oval Molds. These molds come in 2 styles. Vertical Standing or Horizontal Standing. \u003cbr\u003e\u003cbr\u003eThis was a collaboration with @HandandHalo \u003cbr\u003eResin work and photos by @mlcresindesigns for horizontal piece and by @ivorycoledesigns for the vertical piece\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease message us with any questions you may have regarding this mold.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAll molds are handmade and inspected before shipping.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Vertical Standing","offer_id":43760898277601,"sku":"OVALVERT","price":150.0,"currency_code":"USD","in_stock":true},{"title":"Horizontal Standing","offer_id":43760898310369,"sku":"OVALHORIZ","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/standing_oval.png?v=1759868356"},{"product_id":"cross-resin-mold-12x-8x-3-deep-ultra-quality-cross-mold-memorial-molds-block-mold-flower-preservation-mold-3-deep-molds","title":"12”x8”x3” Deep Cross Resin Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 12\"\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 8\"\u003cbr\u003e\u003cstrong\u003eCavity Width:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003cstrong\u003eDeep: 3\"\u003c\/strong\u003e\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Deep Cross Silicone Mold. We offer 2 styles. Straight and Flared\u003c\/p\u003e\n\u003cp\u003eResin work and photos by @floracreekplace\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*WALL STIFFENERS* are embedded into the silicone to make sure the silicone does not bow inwards or outwards. This is important to ensure your final result has straight sides.\u003cbr\u003e\u003cbr\u003eFree Template included for easy layout of your design!!\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":43760887726305,"sku":"CROSS12X8","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Cross_straight.png?v=1759864863"},{"product_id":"12-x8-x3-deep-flared-cross-mold","title":"12”x8”x3” Deep Flared Cross Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTall: 12\"\u003cbr\u003eWidth: 8\"\u003cbr\u003eCavity Width: 3\"+\u003cbr\u003eDeep: 3\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Deep Cross Silicone Mold. This style is the flared version.\u003c\/p\u003e\n\u003cp\u003e*WALL STIFFENERS* are embedded into the silicone to make sure the silicone does not bow inwards or outwards. This is important to ensure your final result has straight walls  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFree Template included for easy layout of your design!!\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":43761679794401,"sku":"CROSSFLARE12X8","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_604c6dbf-30fe-4727-96be-f939ccd6b19b.png?v=1759860569"},{"product_id":"deep-bookend-mold-3-sizes","title":"Deep Bookend Mold | 3 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eORIGINAL STYLE\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSmall:\u003c\/strong\u003e 4\" x 5\"\u003cbr\u003e\u003cstrong\u003eMedium: \u003c\/strong\u003e5\" x 7\"\u003cbr\u003e\u003cstrong\u003eLarge: \u003c\/strong\u003e7\" x 9\"\u003cbr\u003e\u003cstrong\u003eAll 3\" Deep\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSurface Finish: \u003c\/strong\u003eGlossy\/Smooth\/Shiny Top and Sides\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*WALL STIFFENERS* are embedded into the silicone to make sure the silicone does not bow inwards or outwards. This is important to ensure your final result has straight sides.\u003cbr\u003e\u003cbr\u003eThis listing is for a Deep Bookend Molds. We offer them in 3 sizes.\u003cbr\u003e\u003cbr\u003eFree Template included for easy layout of your design!!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 4\" x 5\"","offer_id":44167582712033,"sku":"BOOK45","price":175.0,"currency_code":"USD","in_stock":true},{"title":"Medium - 5\" x 7\"","offer_id":44167582744801,"sku":"BOOK57","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Large - 7\" x 9\"","offer_id":44167582777569,"sku":"BOOK79","price":305.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/ALL_regular_BOOKENDS_ef1139f6-a549-4c8f-bd64-31528b51f936.png?v=1759365782"},{"product_id":"deep-rainbow-mold-2-sizes","title":"Deep Rainbow Mold | 2 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSMALL:\u003c\/strong\u003e 4\" X 8\"\u003cbr\u003e\u003cstrong\u003eLARGE:\u003c\/strong\u003e 5.5\" X 11\u003cbr\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSURFACE FINISH:\u003c\/strong\u003e  Smooth\/Glossy\/Shiny\u003cbr\u003eThis listing is for a Deep Rainbow Mold. We offer this mold in 2 Sizes! \u003cbr\u003e\u003cbr\u003e\"This shape can represent so many things. It's for the mother who gives birth to her rainbow baby, for the newlyweds embarking on this journey called marriage, for the widow remembering her lifelong love. Whatever your memory, we are here to help you preserve it.\" @madetoloveva\u003cbr\u003e\u003cbr\u003eThis mold is from a collaboration with @madetoloveva. All resin work shown was done by them.\u003cbr\u003e\u003cbr\u003eFree Template included for easy layout of your design!!\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"8\" - Small","offer_id":43869089792225,"sku":"RAINBOWSM","price":110.0,"currency_code":"USD","in_stock":true},{"title":"11\" - Large","offer_id":43869089824993,"sku":"RAINBOWLG","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Rainbow.png?v=1759867635"},{"product_id":"cross-silicone-mold-5-sizes","title":"Cross Silicone Mold | 5 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e4\" TALL CROSS:  4\" x 2.25\" x 5\/8\" Cavity Width; 3\/4\" Thick\u003cbr\u003e6\" TALL CROSS:  6\" x 3.25\" x 1\" Cavity Width; 1.25\" Thick\u003cbr\u003e9\" TALL CROSS:  9\" x 4 7\/8\" x 1.5\" Cavity Width; 1.25\" Thick\u003cbr\u003e13\" TALL CROSS: 13\" x 7\" x 1.5\" Cavity Width; 1.25\" Thick\u003cbr\u003e20\" TALL CROSS: 20\" X 10\" X 2.5\" Cavity Width; 1.25\" Thick\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Finish:\u003c\/strong\u003e Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template for 20\" Cross:\u003c\/strong\u003e Exact size of final casting\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Deep Cross Silicone Mold. We are offering this mold in 5 sizes to meet all your needs. \u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4\" Tall - 3\/4\" Thick Mold","offer_id":44042283188449,"sku":"CROSS4","price":20.0,"currency_code":"USD","in_stock":true},{"title":"6\" Tall - 1.25\" Thick Mold","offer_id":45088651968737,"sku":"CROSS6","price":30.0,"currency_code":"USD","in_stock":true},{"title":"9\" Tall - 1.25\" Thick Mold","offer_id":45088652001505,"sku":"CROSS9","price":45.0,"currency_code":"USD","in_stock":true},{"title":"13\" Tall - 1.25\" Thick Mold","offer_id":45088652034273,"sku":"CROSS13","price":70.0,"currency_code":"USD","in_stock":true},{"title":"20\" Tall - 1.25\" Thick Mold","offer_id":45811557204193,"sku":"CROSS20","price":95.0,"currency_code":"USD","in_stock":true},{"title":"20\" Cross Acrylic Template - Not the Mold","offer_id":46284419432673,"sku":"CROSS20ACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/THIN_CROSS_MOLDS.png?v=1753299385"},{"product_id":"hexagon-silicone-mold-9-sizes","title":"Hexagon Silicone Mold | 9 SIZES |","description":"\u003cp\u003e\u003cstrong\u003eFLORAL PRESERVATION MOLD\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e4\" X 4.6\" X 3\"\u003cbr\u003e5\" X 5.8\" X 3\"\u003cbr\u003e6\" X 6.9\" X 3\"\u003cbr\u003e7\" X 8.1\" X 3\"\u003cbr\u003e8\" X 9\" X 3\"\u003cbr\u003e9\" X 10.4\" X 3\"\u003cbr\u003e10\" X 11\" X 3\"\u003cbr\u003e11\" X 12.7\" X 3\"\u003cbr\u003e12\" X 13.8\" X 3\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003cbr\u003e\u003cbr\u003e*WALL STIFFENERS* are embedded into the silicone to make sure the silicone does not bow inwards or outwards. This is important to ensure your final result has straight sides.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003c\/p\u003e\n\u003cp\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDONT TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003eUse scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003eUSE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003eMake sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003ePlease follow all safety precautions when using resin. It is very toxic.\u003cbr\u003eIf you have further questions or concerns about your mold, please shoot me a message  and Ill get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4\"","offer_id":43965556523233,"sku":"HEX4","price":75.0,"currency_code":"USD","in_stock":true},{"title":"5\"","offer_id":43965557539041,"sku":"HEX5","price":95.0,"currency_code":"USD","in_stock":true},{"title":"6\"","offer_id":43965557571809,"sku":"HEX6","price":120.0,"currency_code":"USD","in_stock":true},{"title":"7\"","offer_id":43965557604577,"sku":"HEX7","price":135.0,"currency_code":"USD","in_stock":true},{"title":"8\"","offer_id":43965557637345,"sku":"HEX8","price":145.0,"currency_code":"USD","in_stock":true},{"title":"9\"","offer_id":43965557670113,"sku":"HEX9","price":165.0,"currency_code":"USD","in_stock":true},{"title":"10\"","offer_id":43965557702881,"sku":"HEX10","price":175.0,"currency_code":"USD","in_stock":true},{"title":"11\"","offer_id":43965557735649,"sku":"HEX11","price":189.0,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":43965557768417,"sku":"HEX12","price":215.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/HEXAGON_ALL_1.png?v=1759365375"},{"product_id":"9-tall-3-deep-alphabet-letter-silicone-molds","title":"9\" Tall - 3\" Deep Alphabet Letter Silicone Molds","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFLORAL PRESERVATION MOLDS\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e 9\" \u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e Varies on each individual letter\u003cbr\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e 3\" \u003cbr\u003e\u003cstrong\u003eSurface Finish: \u003c\/strong\u003eSmooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e LETTERS \"F\" AND \"P\" HAVE BEEN REVISED SO THAT THEY STAND ON THEIR OWN. \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eWith our letter molds, you are able to work with your flowers face up.\u003cbr\u003e\u003cbr\u003e*WALL STIFFENERS* are embedded into the silicone to make sure the silicone does not bow inwards or outwards. All MAIN straight sides of the letters will have embedded supports. For example: \"A\" will only come with stiffeners on the two long outside walls. \"B\" will only have it along the long straight wall on the left. \"C\" will have none due to it being curved, etc...\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eResin work and photos by @ivorycoledesigns\u003cbr\u003eListing video by @flower_preserve\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Letter A","offer_id":44079533359329,"sku":"A9","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Letter B","offer_id":44079533392097,"sku":"B9","price":155.0,"currency_code":"USD","in_stock":true},{"title":"Letter C","offer_id":44079533424865,"sku":"C9","price":180.0,"currency_code":"USD","in_stock":true},{"title":"Letter D","offer_id":44079536537825,"sku":"D9","price":155.0,"currency_code":"USD","in_stock":true},{"title":"Letter E","offer_id":44079536570593,"sku":"E9","price":185.0,"currency_code":"USD","in_stock":true},{"title":"Letter F","offer_id":44079536603361,"sku":"F9","price":150.0,"currency_code":"USD","in_stock":true},{"title":"Letter G","offer_id":44079536636129,"sku":"G9","price":170.0,"currency_code":"USD","in_stock":true},{"title":"Letter H","offer_id":44079536668897,"sku":"H9","price":190.0,"currency_code":"USD","in_stock":true},{"title":"Letter I","offer_id":44079536701665,"sku":"I9","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Letter J","offer_id":44079536734433,"sku":"J9","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Letter K","offer_id":44079536767201,"sku":"K9","price":185.0,"currency_code":"USD","in_stock":true},{"title":"Letter L","offer_id":44079536799969,"sku":"L9","price":130.0,"currency_code":"USD","in_stock":true},{"title":"Letter M","offer_id":44079536832737,"sku":"M9","price":210.0,"currency_code":"USD","in_stock":true},{"title":"Letter N","offer_id":44079536865505,"sku":"N9","price":185.0,"currency_code":"USD","in_stock":true},{"title":"Letter O","offer_id":44079536898273,"sku":"O9","price":165.0,"currency_code":"USD","in_stock":true},{"title":"Letter P","offer_id":44079536931041,"sku":"P9","price":145.0,"currency_code":"USD","in_stock":true},{"title":"Letter Q","offer_id":44079536963809,"sku":"Q9","price":165.0,"currency_code":"USD","in_stock":true},{"title":"Letter R","offer_id":44079536996577,"sku":"R9","price":175.0,"currency_code":"USD","in_stock":true},{"title":"Letter S","offer_id":44079537029345,"sku":"S9","price":175.0,"currency_code":"USD","in_stock":true},{"title":"Letter T","offer_id":44079537062113,"sku":"T9","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Letter U","offer_id":44079537094881,"sku":"U9","price":185.0,"currency_code":"USD","in_stock":true},{"title":"Letter V","offer_id":44079537127649,"sku":"V9","price":155.0,"currency_code":"USD","in_stock":true},{"title":"Letter W","offer_id":44079537160417,"sku":"W9","price":225.0,"currency_code":"USD","in_stock":true},{"title":"Letter X","offer_id":44079537193185,"sku":"X9","price":175.0,"currency_code":"USD","in_stock":true},{"title":"Letter Y","offer_id":44079537225953,"sku":"Y9","price":140.0,"currency_code":"USD","in_stock":true},{"title":"Letter Z","offer_id":44079537258721,"sku":"Z9","price":175.0,"currency_code":"USD","in_stock":true},{"title":"Ampersand \u0026","offer_id":44079537291489,"sku":"\u00269","price":170.0,"currency_code":"USD","in_stock":true},{"title":"26 Letters Plus \u0026","offer_id":44079537324257,"sku":"ALLLETTERS9","price":4505.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/9_letters.png?v=1759855006"},{"product_id":"paper-weight-molds-9-shapes-baby-molds-pocket-collection-molds","title":"Paper Weight Molds | 9 Shapes | Baby Molds, Pocket Collection Molds","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFINAL CAST DIMENSIONS:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHeight of all Shapes: 3.5\". \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWidth: Varies according to shape\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepth: 1.25\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinish: Glossy\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eSHAPES AVAILABLE:\u003c\/strong\u003e\u003cbr\u003eArch\u003cbr\u003eBook Ends\u003cbr\u003eHeart\u003cbr\u003eHexagon\u003cbr\u003eRainbow\u003cbr\u003eRectangle\u003cbr\u003eSquare\u003cbr\u003eStanding Oval\u003cbr\u003eStanding Round\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/span\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Arch","offer_id":44089512558817,"sku":"BABYARCH","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Book Ends","offer_id":44089512624353,"sku":"BABYBOOKENDS","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Heart","offer_id":44089512657121,"sku":"BABYHEART","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Hexagon","offer_id":44089512689889,"sku":"BABYHEX","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Rainbow","offer_id":44089512722657,"sku":"BABYRAINBOW","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Rectangle","offer_id":44089512755425,"sku":"BABYRECTANGLE","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Square","offer_id":44089512788193,"sku":"BABYSQUARE","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Standing Oval","offer_id":44089512820961,"sku":"BABYOVAL","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Standing Round","offer_id":44089512853729,"sku":"BABYROUND","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/paper_weight_aec0fc2b-7f00-43a1-80ee-0cb624dcbfc6.png?v=1753300099"},{"product_id":"deep-heart-mold-5-7-9","title":"Deep Heart Mold | 5\", 7\", 9\" |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMALL:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHEIGHT: 5\"\u003cbr\u003eWIDTH: 5.6\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMEDIUM:\u003c\/strong\u003e\u003cbr\u003eHEIGHT: 7\"\u003cbr\u003eWIDTH: 7.9\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLARGE:\u003c\/strong\u003e\u003cbr\u003eHEIGHT: 9\"\u003cbr\u003eWIDTH: 10.1\"\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDEPTH:\u003c\/strong\u003e All Sizes are 3\" Deep\u003cbr\u003e\u003cstrong\u003eSURFACE FINISH;\u003c\/strong\u003e Smooth, Shiny, Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Deep Heart Mold.  We offer this shape in 3 sizes.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003ePlease message us with any questions you may have regarding this mold.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAll molds are handmade and inspected before shipping.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"5\" - Small","offer_id":44159950553313,"sku":"DEEPHEART5","price":60.0,"currency_code":"USD","in_stock":true},{"title":"7\" - Medium","offer_id":44159985320161,"sku":"DEEPHEART7","price":99.0,"currency_code":"USD","in_stock":true},{"title":"9\" - Large","offer_id":44159985385697,"sku":"DEEPHEART9","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/hearts_all_012dc9fc-40c7-4088-8e10-8ad85ef6635d.png?v=1759853138"},{"product_id":"3-deep-round-mold-4-sizes","title":"3\" Deep Round Mold | 4 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eDiameter: 12\", 14\", 18\" or 24\"\u003cbr\u003eDepth: 3\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003cbr\u003e\u003cbr\u003eThis listing is for a Deep Round Molds. We are offering this in 4 sizes - 12\", 14\", 18\" and 24\". All 3\" Deep. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eResin work and photos courtesy of @pkwooddesign and @crystal.seas.art\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message  and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"12\"","offer_id":44608670892257,"sku":"ROUND12X3","price":165.0,"currency_code":"USD","in_stock":true},{"title":"14\"","offer_id":44173342998753,"sku":"ROUND14","price":200.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":44173343031521,"sku":"ROUND18","price":275.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":44173343064289,"sku":"ROUND24","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/dEEP_ROUND_4_SIZES.png?v=1753298629"},{"product_id":"deep-rounded-bookend-mold-3-sizes","title":"Deep ROUNDED Bookend Mold | 3 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eROUNDED STYLE\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSmall:\u003c\/strong\u003e 4\" x 5\"\u003cbr\u003e\u003cstrong\u003eMedium:\u003c\/strong\u003e 5\" x 7\"\u003cbr\u003e\u003cstrong\u003eLarge:\u003c\/strong\u003e 7\" x 9\"\u003cbr\u003e\u003cstrong\u003eAll 3\" Deep\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSurface Finish: \u003c\/strong\u003eGlossy\/Smooth\/Shiny Top and Sides\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis listing is for Deep Rounded Bookend Molds. This shape is more rounded than our other Bookend Molds giving you more space to work with. \u003cbr\u003e\u003cbr\u003e*WALL STIFFENERS* are embedded into the silicone to make sure the silicone does not bow inwards or outwards. This is important to ensure your final result has straight sides.\u003cbr\u003eFree Template included for easy layout of your design!!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFree Template included for easy layout of your design!!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 4\" x 5\"","offer_id":44218597179617,"sku":"ROUNDBOOK45","price":175.0,"currency_code":"USD","in_stock":true},{"title":"Medium - 5\" x 7\"","offer_id":44218597212385,"sku":"ROUNDBOOK57","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Large - 7\" x 9\"","offer_id":44218597245153,"sku":"ROUNDBOOK79","price":305.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/ALL_ROUNDED_BOOKENDS_8b78f84c-1534-4285-bb18-0420db6e32f4.png?v=1759365609"},{"product_id":"3-deep-square-molds-7-sizes","title":"3\" Deep Square  Molds | 7 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eSQUARES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3\" x 3\"\u003cbr\u003e4\" x 4\"\u003c\/p\u003e\n\u003cp\u003e5\" x 5\"\u003cbr\u003e6\" x 6\" \u003cbr\u003e8\" x 8\"\u003cbr\u003e10\" x 10\"\u003cbr\u003e12\" x 12\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDEPTH:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003cstrong\u003eSURFACE FINISH:\u003c\/strong\u003e All surfaces are smooth and glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for 3\" Deep Square Molds.  We offer this popular mold in 7 sizes.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e*WALL STIFFENERS* are embedded into the silicone to make sure the silicone does not bow inwards or outwards. This is important to ensure your final result has straight sides.\u003c\/p\u003e\n\u003cp\u003eThe 3\"x3\" mold does not have wall stiffeners due to its small size.\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"3\" x 3\"","offer_id":44324861214945,"sku":"3X3X3","price":65.0,"currency_code":"USD","in_stock":true},{"title":"4\" x 4\"","offer_id":44324861247713,"sku":"4X4X3","price":75.0,"currency_code":"USD","in_stock":true},{"title":"5\" x 5\"","offer_id":45523577962721,"sku":"5X5X3","price":85.0,"currency_code":"USD","in_stock":true},{"title":"6\" x 6\"","offer_id":44324861280481,"sku":"6X6X3","price":95.0,"currency_code":"USD","in_stock":true},{"title":"8\" x 8\"","offer_id":44324861313249,"sku":"8X8X3","price":125.0,"currency_code":"USD","in_stock":true},{"title":"10\" x 10\"","offer_id":44324861346017,"sku":"10X10X3","price":150.0,"currency_code":"USD","in_stock":true},{"title":"12\" x 12\"","offer_id":44324861378785,"sku":"12X12X3","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/all_square_shopify.png?v=1759865541"},{"product_id":"deep-gem-silicone-mold-5-6-8","title":"Deep Gem Silicone Mold | 5\", 6\", 8\" |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSmall:\u003c\/strong\u003e 5.1\" x 4.1\" x 2\"\u003cbr\u003e\u003cstrong\u003eMedium:\u003c\/strong\u003e 6\" x 5.3\" x 2.3\"\u003cbr\u003e\u003cstrong\u003eLarge:\u003c\/strong\u003e 8\" x 6\" x 2.3\"\u003cbr\u003e\u003cbr\u003eThis listing is for a Deep Standing Gem Mold with faceted sides.\u003c\/p\u003e\n\u003cp\u003eFree Template included for easy layout of your design!!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease message us with any questions you may have regarding this mold.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAll molds are handmade and inspected before shipping.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 5\"","offer_id":44380494921953,"sku":"GEM5SM","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Medium - 6\"","offer_id":44380494954721,"sku":"GEM6MED","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Large - 8\"","offer_id":44380494987489,"sku":"GEM8LG","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/GEM_ALL_45265def-e179-47fa-aba2-3b043e817509.png?v=1759853859"},{"product_id":"6-tall-alphabet-letter-silicone-molds","title":"6\" Tall Alphabet Letter Silicone Molds","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFLORAL PRESERVATION MOLD\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eHeight\u003c\/strong\u003e: 6\" \u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e Varies on each individual letter\u003cbr\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e 2\" \u003cbr\u003e\u003cstrong\u003eSurface Finish\u003c\/strong\u003e: Smooth\/Shiny\/Glossy\u003cbr\u003e\u003cbr\u003eThis listing is for Alphabet Letter Silicone Molds. The Letter \"I\" has cross bars at the top and bottom. The letters \"P\" and \"F\" are designed to be able to stand on their own. \u003c\/p\u003e\n\u003cp\u003eWith our letter molds, you are able to work with your flowers face up.\u003c\/p\u003e\n\u003cp\u003eResin work and photos courtesy of @bupp_woodworks\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Letter A","offer_id":44447254675681,"sku":"A6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter B","offer_id":44447254708449,"sku":"B6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter C","offer_id":44447254741217,"sku":"C6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter D","offer_id":44447254773985,"sku":"D6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter E","offer_id":44447254806753,"sku":"E6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter F","offer_id":44447254839521,"sku":"F6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter G","offer_id":44447254872289,"sku":"G6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter H","offer_id":44447254905057,"sku":"H6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter I","offer_id":44447254937825,"sku":"I6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter J","offer_id":44447254970593,"sku":"J6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter K","offer_id":44447255003361,"sku":"K6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter L","offer_id":44447255036129,"sku":"L6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter M","offer_id":44447255068897,"sku":"M6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter N","offer_id":44447255101665,"sku":"N6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter O","offer_id":44447255134433,"sku":"O6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter P","offer_id":44447255167201,"sku":"P6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter Q","offer_id":44447255199969,"sku":"Q6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter R","offer_id":44447255232737,"sku":"R6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter S","offer_id":44447255265505,"sku":"S6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter T","offer_id":44447255298273,"sku":"T6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter U","offer_id":44447255331041,"sku":"U6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter V","offer_id":44447255363809,"sku":"V6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter W","offer_id":44447255396577,"sku":"W6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter X","offer_id":44447255429345,"sku":"X6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter Y","offer_id":44447255462113,"sku":"Y6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Letter Z","offer_id":44447255494881,"sku":"Z6","price":75.0,"currency_code":"USD","in_stock":true},{"title":"Ampersand \u0026","offer_id":44447255527649,"sku":"AMP6","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/6_letters_1.png?v=1759854786"},{"product_id":"4-x-4-75-x-1-hexagon-coaster-mold","title":"4\" X 4.75\" X 1\" Hexagon Coaster Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003eHeight: 4\"\u003cbr\u003eWidth: 4.75\"\u003cbr\u003eDepth: 1\"\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":44453558452449,"sku":"HEXCSTR4X1","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/HEXAGON_1_COASTER.png?v=1753299011"},{"product_id":"11-5-x-3-x-2-5-menorah-mold","title":"11.5\" x 3\" x 2.5\" Menorah Mold","description":"\u003cp\u003e\u003cstrong\u003eFLORAL PRESERVATION MOLD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003eOverall Length: 11.5\"\u003cbr\u003eWidth: 3\"\u003cbr\u003eHeight: 2.5\"\u003cbr\u003eShamash Height: 3\"\u003cbr\u003eShamash Width: 1\"\u003cbr\u003eCandle Hole Diameter: 1\/2\"\u003cbr\u003eNumber of Candle Holes: 9\u003cbr\u003eGlossy\/Smooth\/Shiny Top + Sides\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis mold will create a piece that will properly display an elevated shamash candle.  The shamash portion is 1\/2\" taller, 1\" wide and extends an extra 1\/4\" on the sides. The 11.5\" walls have wall supports embedded in the mold.\u003c\/p\u003e\n\u003cp\u003eThank you to our friends over at @wildcoastflowerpreservation for partnering with us for the design and creation of this mold.  All photos are courtesy of @wildcoastflowerpreservation\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePlease message us with any questions you may have regarding this mold.\u003cbr data-mce-fragment=\"1\"\u003emold.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll molds are handmade and inspected before shipping.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur Smoothon Mold Star silicone molds cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Make sure the resin is fully. Uncured resin may rip the mold.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/span\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":45769357295841,"sku":"MENORAH","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/B5A6425D-F856-44DA-8DEA-7650A78EECD9.png?v=1731073594"},{"product_id":"mezuzah-mold-2-sizes","title":"Mezuzah Mold | 2 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMALL:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 4.5\"\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.5”\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e 3\/4\"\u003cbr\u003e\u003cstrong\u003eCavity Length:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003cstrong\u003eCavity Width:\u003c\/strong\u003e 5\/8\"\u003cbr\u003e\u003cstrong\u003eCavity Depth:\u003c\/strong\u003e 1\/2\"\u003cbr\u003eGlossy\/Smooth\/Shiny Top + Sides\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLARGE:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eLength:\u003c\/strong\u003e 6\"\u003cbr\u003e\u003cstrong\u003eWidth:\u003c\/strong\u003e 1.5\"\u003cbr\u003e\u003cstrong\u003eThickness:\u003c\/strong\u003e 1\"\u003cbr\u003e\u003cstrong\u003eCavity Length:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eCavity Width:\u003c\/strong\u003e 1\/2\"\u003cbr\u003e\u003cstrong\u003eCavity Depth:\u003c\/strong\u003e 1\/2\"\u003cbr\u003eGlossy\/Smooth\/Shiny Top + Sides\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Mezuzah Mold. We offer it in two sizes. Each has a cavity with the dimensions stated above for a scroll. \u003c\/p\u003e\n\u003cp\u003eWe offer clear acrylic backing to close and secure the scroll in the cavity. You can use UV resin, double sided tape or hot glue to seal and secure the backing to your mezuzah.  You can use strong 3M tape to secure mezuzah to the door.\u003c\/p\u003e\n\u003cp\u003eThank you to our friends over at @wildcoastflowerpreservation for partnering with us for the design and creation of this mold. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003emold.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAll molds are handmade and inspected before shipping.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/span\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold \/ Small - 4.5\"x1.5\"x.75\"","offer_id":46250076274913,"sku":"MEZUZAHSM","price":27.5,"currency_code":"USD","in_stock":true},{"title":"Silicone Mold \/ Large - 6\"x1.5\"x1\"","offer_id":47459648110817,"sku":"MEZUZAHLG","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Clear Plastic Acrylic Backing - Not the Mold \/ Small - 4.5\"x1.5\"x.75\"","offer_id":46250076307681,"sku":"SMALLMEZUZAHACRYLIC","price":2.5,"currency_code":"USD","in_stock":true},{"title":"Clear Plastic Acrylic Backing - Not the Mold \/ Large - 6\"x1.5\"x1\"","offer_id":47459648143585,"sku":"LARGEMEZUZAHACRYLIC","price":2.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/mezuzah_3ff1bdac-33b5-4395-aa8a-d069ceb00306.png?v=1763138395"},{"product_id":"picture-frame-mold-3-thick-3-sizes-frame-mold-deep-frame-mold-large-picture-frame-mold-photo-frame-mold-copy","title":"5\" x 7\" Picture Frame Silicone Mold | 3\" Deep |","description":"\u003cp\u003e\u003cstrong\u003eFLORAL PRESERVATION MOLD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003ePhoto Size: 5\" x 7\"\u003cbr\u003eOuter Dimension: 12.5\" x 10.5\"\u003cbr\u003eBorder Width: 2.75\"\u003cbr\u003eDepth: 3\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApproximate Resin Volume:\u003c\/strong\u003e 255 in ^3 (inches cubed)\u003c\/p\u003e\n\u003cp\u003eThis mold is designed so you are working with your flowers face up.\u003cbr\u003e\u003cbr\u003e*** 1 Piece of Acrylic Photo Backing is included with every mold order. Additional pieces available to order. ***\u003c\/p\u003e\n\u003cp\u003eAcrylic backing may need to be slightly sanded in order to fit due to resin shrinkage. \u003c\/p\u003e\n\u003cp\u003ePhoto placement is recessed 1 1\/2” from the top.\u003c\/p\u003e\n\u003cp\u003eMinimum pour depth for proper function is 1.75” to 2”\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eYou may wonder how a picture will be able to stay in and you will quickly see that in each corner a ledge is formed. Having the ledge in the corner allows for easy demolding. On top of this, you will be able to purchase precision cut acrylic sheets that fit the photo perfectly. This is how the photo will sit in your resin piece on the ledges without bending. The picture will set halfway up the frame. You can double sided tape the photo to the acrylic and also glue or tape the acrylic to the resin to make it secure. You can also sandwich the picture between 2 pieces of acrylic.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003eThis 3\" Thick Frame will have wall stiffeners embedded into the outside walls of silicone to make sure the silicone does not bow inwards or outwards. This is important to ensure your final result has straight sides. They will be embedded on the outer walls.\u003c\/p\u003e\n\u003cp\u003eResin work and photos courtesy of @crystal.seas.art\u003cbr\u003e\u003cbr\u003eFree Template included for easy layout of your design!!\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":45887104549089,"sku":"3FRAME5X7","price":285.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Backing","offer_id":45887104581857,"sku":"5X7ACRYLIC","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/BEE802CB-EC2B-494E-96F1-129CBBF5B769.png?v=1731184912"},{"product_id":"5-x-7-picture-frame-silicone-mold-3-deep-copy-1","title":"4\" x 6\" Picture Frame Silicone Mold | 3\" Deep |","description":"\u003cp\u003e\u003cstrong\u003eFLORAL PRESERVATION MOLD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003ePhoto Size: 4\" x 6\"\u003cbr\u003eOuter Dimension: 9.5\" x 11.5\"\u003cbr\u003eBorder Width: 2.75\"\u003cbr\u003eDepth: 3\"\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eApproximate Resin Volume:\u003c\/strong\u003e 255 in ^3 (inches cubed)\u003c\/p\u003e\n\u003cp\u003eThis mold is designed so you are working with your flowers face up.\u003cbr\u003e\u003cbr\u003e*** 1 Piece of Acrylic Photo Backing is included with every mold order. Additional pieces available to order. ***\u003c\/p\u003e\n\u003cp\u003eAcrylic backing may need to be slightly sanded in order to fit due to resin shrinkage. \u003c\/p\u003e\n\u003cp\u003ePhoto placement is recessed 1 1\/2” from the top.\u003c\/p\u003e\n\u003cp\u003eMinimum pour depth for proper function is 1.75” to 2”\u003c\/p\u003e\n\u003cp\u003eYou may wonder how a picture will be able to stay in and you will quickly see that in each corner a ledge is formed. Having the ledge in the corner allows for easy demolding. On top of this, you will be able to purchase precision cut acrylic sheets that fit the photo perfectly. This is how the photo will sit in your resin piece on the ledges without bending. The picture will set halfway up the frame. You can double sided tape the photo to the acrylic and also glue or tape the acrylic to the resin to make it secure. You can also sandwich the picture between 2 pieces of acrylic.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003eThis 3\" Thick Frame will have wall stiffeners embedded into the outside walls of silicone to make sure the silicone does not bow inwards or outwards. This is important to ensure your final result has straight sides. They will be embedded on the outer walls.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFree Template included for easy layout of your design!!\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":45910049128673,"sku":"3FRAME4X6","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Backing","offer_id":45910049161441,"sku":"4X6ACRYLIC","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_c8a1ad9d-f8d7-44ee-b216-87daa8a45eb1.png?v=1731687940"},{"product_id":"13x-11-5x-1-25-heart-charcuterie-board-silicone-mold-serving-board-mold","title":"13\"x 11.5\"x 1.25\" Heart Charcuterie Board Silicone Mold - Serving Board Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 13\"\u003cbr\u003eWidth: 11.5\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a heart shaped serving board silicone mold that has an integrated heart shaped handle hole.\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":46061698875617,"sku":"HEARTCHARCUT","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":46061698908385,"sku":"HEARTACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":46383443149025,"sku":"F.C.HEARTACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/heart_charcuterie.png?v=1753115705"},{"product_id":"8-x-10-picture-frame-silicone-mold-3-deep","title":"8\" x 10\" Picture Frame Silicone Mold | 3\" Deep |","description":"\u003cp\u003e\u003cstrong\u003eFLORAL PRESERVATION MOLD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePhoto Size:\u003c\/strong\u003e 8\" x 10\"\u003cbr\u003e\u003cstrong\u003eOuter Dimension:\u003c\/strong\u003e 13 11\/16\" X 15 11\/16\"\u003cbr\u003e\u003cstrong\u003eBorder Width:\u003c\/strong\u003e 2.75\"\u003cbr\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003cstrong\u003eSurface Finish:\u003c\/strong\u003e Smooth\/Glossy\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e*** 1 Piece of 1\/8\" Thick Plastic Acrylic Photo Backing is included with every mold order. Additional pieces available to order. ***\u003c\/p\u003e\n\u003cp\u003eAcrylic backing may need to be slightly sanded in order to fit due to resin shrinkage. \u003c\/p\u003e\n\u003cp\u003ePhoto placement is recessed 1 1\/2” from the top.\u003c\/p\u003e\n\u003cp\u003eMinimum pour depth for proper function is 1.75” to 2”\u003c\/p\u003e\n\u003cp\u003eThis mold is designed so you are working with your flowers face up.\u003c\/p\u003e\n\u003cp\u003eYou may wonder how a picture will be able to stay in and you will quickly see that in each corner a ledge is formed. Having the ledge in the corner allows for easy demolding. On top of this, you will be able to purchase precision cut acrylic sheets that fit the photo perfectly. This is how the photo will sit in your resin piece on the ledges without bending. The picture will set halfway up the frame. You can double sided tape the photo to the acrylic and also glue or tape the acrylic to the resin to make it secure. You can also sandwich the picture between 2 pieces of acrylic.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003eThis 3\" Thick Frame will have wall stiffeners embedded into the outer and inner walls of silicone to make sure the silicone does not bow inwards or outwards. This is important to ensure your final result has straight sides. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFree Template included for easy layout of your design!!\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":46339738108129,"sku":"3FRAME8X10","price":375.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Backing","offer_id":46339738140897,"sku":"8X10ACRYLIC","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_1a2dd703-c6e9-4011-9f6e-6ee24064ed4e.png?v=1746814162"},{"product_id":"5-x-7-arch-picture-frame-silicone-mold-3-deep","title":"5\" x 7\" Arch Picture Frame Silicone Mold | 3\" Deep |","description":"\u003cp\u003e\u003cstrong\u003eFLORAL PRESERVATION MOLD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003ePhoto Size:\u003c\/strong\u003e 5\" x 7\"\u003cbr\u003e\u003cstrong\u003eOuter Dimension:\u003c\/strong\u003e 10 5\/8\" X 13 3\/16\"\u003cbr\u003e\u003cstrong\u003eBorder Width: \u003c\/strong\u003e2.75\" Side, 5.25\" from picture to top\u003cbr\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis arch frame mold is designed so you are working with your flowers face up.\u003cbr\u003e\u003cbr\u003e*** 1 Piece of 1\/8\" Thick Plastic Acrylic Photo Backing is included with every mold order. Additional pieces available to order. ***\u003c\/p\u003e\n\u003cp\u003eAcrylic backing may need to be slightly sanded in order to fit due to resin shrinkage. \u003c\/p\u003e\n\u003cp\u003ePhoto placement is recessed 1 1\/2” from the top.\u003c\/p\u003e\n\u003cp\u003eMinimum pour depth for proper function is 1.75” to 2”\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eYou may wonder how a picture will be able to stay in and you will quickly see that in each corner a ledge is formed. Having the ledge in the corner allows for easy demolding. On top of this, you will be able to purchase precision cut acrylic sheets that fit the photo perfectly. This is how the photo will sit in your resin piece on the ledges without bending. The picture will set halfway up the frame. You can double sided tape the photo to the acrylic and also glue or tape the acrylic to the resin to make it secure. You can also sandwich the picture between 2 pieces of acrylic. Please message me if you would like a further explanation.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e \u003c\/strong\u003eThis 3\" Thick Frame will have wall stiffeners embedded into the outside walls of silicone to make sure the silicone does not bow inwards or outwards. This is important to ensure your final result has straight sides. They will be embedded on the outer walls.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFree Template included for easy layout of your design!!\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":46339786965217,"sku":"3ARCHFRAME5X7","price":285.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Backing","offer_id":46339786997985,"sku":"5X7ACRYLIC","price":3.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_319fd089-9d83-4d72-b82f-588bfa3e7fc5.png?v=1747765037"},{"product_id":"9-x-6-x-2-deep-cross-silicone-mold-2-shapes","title":"9”x 6”x 2” Deep Cross Silicone Mold | 2 Shapes |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 9\"\u003cbr\u003eWidth: 6\"\u003cbr\u003eCavity Width: 2\"\u003cbr\u003eDeep: 2\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Deep Cross Silicone Mold. We offer 2 styles - Straight and Flared. \u003cbr\u003e\u003cbr\u003eFree Template included for easy layout of your design!!\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Straight Cross","offer_id":46387001393377,"sku":"CROSS9X6","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Flared Cross","offer_id":46387001426145,"sku":"FLAREDCROSS9X6","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/9X6_CROSS_MOLDS_1.png?v=1759855552"},{"product_id":"deep-standing-heart-mold-6-8","title":"Deep Standing Heart Mold | 6\" \u0026 8\" |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMALL:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHEIGHT\u003c\/strong\u003e: 4.7\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 6\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFLAT BOTTOM:\u003c\/strong\u003e 1.7\"\u003c\/p\u003e\n\u003cblockquote\u003e\u003c\/blockquote\u003e\n\u003cp\u003e\u003cstrong\u003eMEDIUM:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHEIGHT\u003c\/strong\u003e: 6.2\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 8\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFLAT BOTTOM:\u003c\/strong\u003e 2.25\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDEPTH FOR BOTH:\u003c\/strong\u003e 3\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSURFACE FINISH:\u003c\/strong\u003e Smooth, Glossy, Shiny\u003cbr\u003e\u003cbr\u003eThis listing is for a Deep Standing Heart Mold. This mold has a small flat bottom portion allowing this heart to stand straight up.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan\u003ePlease message us with any questions you may have regarding this mold.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eAll molds are handmade and inspected before shipping.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"6\" - Small","offer_id":46525680320737,"sku":"STANDHEART6","price":60.0,"currency_code":"USD","in_stock":true},{"title":"8\" - Medium","offer_id":46525680353505,"sku":"STANDHEART8","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Standing_Heart_Shopify.png?v=1759366693"},{"product_id":"angel-silicone-mold-2-sizes-6-9","title":"Angel Silicone Mold | 2 Sizes - 6\" \u0026 9\" |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSMALL:\u003c\/strong\u003e\u003cbr\u003eHeight:  6\"\u003cbr\u003eWidth:  5.75\"\u003cbr\u003eDepth: 1.25\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLARGE:\u003c\/strong\u003e\u003cbr\u003eHeight:  9\"\u003cbr\u003eWidth:  8.5\"\u003cbr\u003eDepth: 1.25\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSURFACE FINISH:\u003c\/strong\u003e  Smooth\/Glossy\/Shiny\u003c\/p\u003e\n\u003cp\u003eThis listing is for an Angel Silicone Mold.  We offer this mold in 2 sizes - 6\" and 9\". \u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 6\"","offer_id":46673264574689,"sku":"1.25ANGEL6","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Large - 9\"","offer_id":46673264607457,"sku":"1.25ANGEL9","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Angel_Shopify.png?v=1759855356"},{"product_id":"3-deep-rectangle-molds-4-sizes","title":"3\" Deep Rectangle Molds | 4 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRECTANGLES\u003c\/strong\u003e\u003cbr\u003e4.5\" x 3.5\"\u003cbr\u003e9\" x 6\"\u003cbr\u003e12\" x 9\"\u003cbr\u003e14\" x 11\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDEPTH:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003cstrong\u003eSURFACE FINISH:\u003c\/strong\u003e All surfaces are smooth and glossy\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for 3\" Deep Rectangle Molds.  We offer them in 4 sizes.\u003c\/p\u003e\n\u003cp\u003e*WALL STIFFENERS* are embedded into the silicone to make sure the silicone does not bow inwards or outwards. This is important to ensure your final result has straight sides.\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4.5\" x 3.5\"","offer_id":46710361489633,"sku":"4.5X3.5X3","price":75.0,"currency_code":"USD","in_stock":true},{"title":"9\" x 6\"","offer_id":46710361522401,"sku":"9X6X3","price":135.0,"currency_code":"USD","in_stock":true},{"title":"12\" x 9\"","offer_id":46710361555169,"sku":"12X9X3","price":180.0,"currency_code":"USD","in_stock":true},{"title":"14\" x 11\"","offer_id":46710361587937,"sku":"14X11X3","price":285.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/all_rectangles_shopify.png?v=1759865305"},{"product_id":"flared-cross-silicone-mold-5-sizes-cross-mold","title":"Flared Cross Silicone Mold | 5 Sizes | Cross Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e4\" TALL CROSS:  4\" x 2.7\" - 3\/4\" Deep\u003cbr\u003e6\" TALL CROSS:  6\" x 4\" - 1.25\" Deep\u003cbr\u003e9\" TALL CROSS:  9\" x 6\" - 1.25\" Deep\u003cbr\u003e13\" TALL CROSS: 13\" x 8.7\"- 1.25\" Deep\u003cbr\u003e20\" TALL CROSS: 20\" X 11.75\" - 1.25\" Deep\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Finish:\u003c\/strong\u003e Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template for 20\" Cross:\u003c\/strong\u003e Exact size of final casting\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Flared Cross Silicone Mold. We offer 5 different Sizes of these molds. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eResin work and photo by @karasartsecene\u003c\/p\u003e\n\u003cp\u003eThere is a separate listing if you are looking for a cross mold with traditional straight sides. \u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template for the 20\" cross only, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4\" Tall - 3\/4\" Thick Mold","offer_id":47290528334049,"sku":"FLARECROSS4","price":20.0,"currency_code":"USD","in_stock":true},{"title":"6\" Tall - 1.25\" Thick Mold","offer_id":47290528366817,"sku":"FLARECROSS6","price":39.0,"currency_code":"USD","in_stock":true},{"title":"9\" Tall - 1.25\" Thick Mold","offer_id":47290528399585,"sku":"FLARECROSS9","price":52.5,"currency_code":"USD","in_stock":true},{"title":"13\" Tall - 1.25\" Thick Mold","offer_id":47290528432353,"sku":"FLARECROSS13","price":80.0,"currency_code":"USD","in_stock":true},{"title":"20\" Tall - 1.25\" Thick Mold","offer_id":47290528465121,"sku":"FLARECROSS20","price":110.0,"currency_code":"USD","in_stock":true},{"title":"20\" Cross Acrylic Template","offer_id":47290528497889,"sku":"FLARECROSS20ACRYLIC","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_aca879d0-a5d7-4013-889b-7a281eaeacb8.png?v=1761238609"},{"product_id":"4x4x1-4-8-cavity-square-coaster-silicone-mold","title":"4\"x4\"x1\" Coaster Mold | 4 or 8 Cavity | Square Coaster Silicone Mold","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cbr\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eLength: 4\"\u003cbr\u003eWidth: 4\"\u003cbr\u003eThickness: 1\"\u003cbr\u003eSharp Corners\u003cbr\u003eGlossy\/Smooth\/Shiny Top + Sides\u003c\/p\u003e\n\u003cp\u003eCavity: 4 and 8 Cavity\u003cbr\u003e\u003cbr\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message  and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4x4x1 - 4 Cavity","offer_id":47372662636769,"sku":"SQ4X4X1-4UP","price":77.5,"currency_code":"USD","in_stock":true},{"title":"4x4x1 - 8 Cavity","offer_id":47372662669537,"sku":"SQ4X4X1-8UP","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_93e67165-2123-4c84-82e1-65199c465677.png?v=1763946147"},{"product_id":"cross-silicone-mold-5-sizes-1","title":"Cross Silicone Mold | 20\" x 11\" x 2\" |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eHEIGHT:\u003c\/strong\u003e 20\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 11\"\u003cbr\u003e\u003cstrong\u003eDEPTH:\u003c\/strong\u003e 2\"\u003cbr\u003e\u003cstrong\u003eCAVITY WIDTH:\u003c\/strong\u003e 3\"\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Finish:\u003c\/strong\u003e Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template for 20\" Cross:\u003c\/strong\u003e Exact size of final casting\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Deep Cross Silicone Mold. This cross offers a wider and deeper cavity then our other 20\" Cross.\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47881808412897,"sku":"CROSS20X2","price":175.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47881808445665,"sku":"CROSS20X2ACRYLIC","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_953f93dc-a132-4764-b1ba-9459f2e685a1.png?v=1769101758"},{"product_id":"2-deep-oval-silicone-molds-6-sizes-oval-table-molds","title":"2\" Deep Oval Silicone Molds, 6 Sizes, Oval Molds","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSIZES AVAILABLE\u003c\/strong\u003e\u003cbr\u003e10\" X 7\"\u003cbr\u003e12\" X 8.5\"  \u003cbr\u003e14\" X 10\"   \u003cbr\u003e16\" X 11.4\" \u003cbr\u003e18\" X 12.8\" \u003cbr\u003e24\" X 17.1\"\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e  2\"\u003cbr\u003e\u003cstrong\u003eSurface Finish:\u003c\/strong\u003e Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for 2\" Deep Oval Silicone Molds.  We offer this mold in a variety of sizes.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"10\" x 7\" Oval","offer_id":47904270287073,"sku":"OVAL10","price":75.0,"currency_code":"USD","in_stock":true},{"title":"12\" x 8.5\" Oval","offer_id":47904270319841,"sku":"OVAL12","price":95.0,"currency_code":"USD","in_stock":true},{"title":"14\" x 10\" Oval","offer_id":47904270352609,"sku":"OVAL14","price":115.0,"currency_code":"USD","in_stock":true},{"title":"16\" x 11.4\" Oval","offer_id":47904270385377,"sku":"OVAL16","price":140.0,"currency_code":"USD","in_stock":true},{"title":"18\" x 12.8\" Oval","offer_id":47904270418145,"sku":"OVAL18","price":166.0,"currency_code":"USD","in_stock":true},{"title":"24\" x 17.1\" Oval","offer_id":47904270450913,"sku":"OVAL24","price":255.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Shopify_10011bcf-dffe-4ded-a5db-a2ddd7ab30c2.png?v=1774820543"}],"url":"https:\/\/zapp3ddesign.com\/collections\/floral-video-ad.oembed?page=2","provider":"Zapp3D Design LLC","version":"1.0","type":"link"}