{"title":"Top Sellers: Silicone Resin Products","description":"","products":[{"product_id":"rectangle-dish-mold-trinket-dish-mold-dish-mold-small-rectangle-tray-mold","title":"Rectangle Mold | 4”x 3” | Jewelry Dish Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLength: 4”\u003c\/p\u003e\n\u003cp\u003eWidth: 3”\u003c\/p\u003e\n\u003cp\u003eDeep: 3\/4”\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a rectangle mold to create a beautiful rectangle shaped resin dish with angled corners. PLEASE NOTE: The rooster shown on the dish is lightly etched on the mold. Other crafters say that it isn't noticeable on your finished piece.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742932275425,"sku":"ROOST","price":22.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/rooster_dish_shopify.png?v=1741554711"},{"product_id":"picture-frame-with-optional-stand-silicone-mold-4x6-5x7-and-8x10-photos","title":"Picture Frame with optional Stand Silicone Mold - 4x6\", 5x7\", and 8x10\" Photos","description":"\u003cp\u003e\u003cstrong\u003eFRAME PHOTO SIZES AVAILABLE \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e4\" X 6\"\u003c\/b\u003e\u003cbr\u003e\u003cb\u003e5\" X 7\"\u003c\/b\u003e\u003cbr\u003e\u003cb\u003e8\" X 10\"\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to create a Picture frame. The picture frame mold comes in three different sizes, each one for a different photo size. The frames can be hung from the wall, they can be used with the small stands offered, or they can be used with the easel mold we offer! Each picture from can be used landscape or portrait. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4x6 Picture \/ No Stand","offer_id":42742935257313,"sku":"FRME46NONE-5","price":35.0,"currency_code":"USD","in_stock":true},{"title":"4x6 Picture \/ Small Stand - 2 Pair","offer_id":42742935290081,"sku":"FRME46SMLL2-5","price":45.0,"currency_code":"USD","in_stock":true},{"title":"4x6 Picture \/ Easle Stand","offer_id":42742935322849,"sku":"FRME46ESLE-5-4","price":55.0,"currency_code":"USD","in_stock":true},{"title":"5x7 Picture \/ No Stand","offer_id":42742935355617,"sku":"FRME57NONE-5","price":42.5,"currency_code":"USD","in_stock":true},{"title":"5x7 Picture \/ Small Stand - 2 Pair","offer_id":42742935421153,"sku":"FRME57SMLL2-5","price":52.5,"currency_code":"USD","in_stock":true},{"title":"5x7 Picture \/ Easle Stand","offer_id":42742935453921,"sku":"FRME57ESLE-5-4","price":62.5,"currency_code":"USD","in_stock":true},{"title":"8x10 Picture \/ No Stand","offer_id":42742935486689,"sku":"FRME810NONE-7","price":70.0,"currency_code":"USD","in_stock":true},{"title":"8x10 Picture \/ Small Stand - 2 Pair","offer_id":42742935519457,"sku":"FRME810SMLL2-7","price":80.0,"currency_code":"USD","in_stock":true},{"title":"8x10 Picture \/ Easle Stand","offer_id":42742935552225,"sku":"FRME810ESLE-7-4","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/teal_frame_molds_shopify.png?v=1762125608"},{"product_id":"frog-silicone-mold-4-sizes","title":"Frog Silicone Mold | 4 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eMini:\u003c\/strong\u003e 1\" long, .75\" wide, 1\" tall - Matte Finish\u003cbr\u003e\u003cstrong\u003eSmall:\u003c\/strong\u003e 1.25\" long, 1\" wide, 1 1\/4\" tall - Semi Gloss Finish\u003cbr\u003e\u003cstrong\u003eMedium\u003c\/strong\u003e: 1.75\" long, 1\" wide, 1 1\/3\" tall - Glossy Finish (ORIGINAL SIZE)\u003cbr\u003e\u003cstrong\u003eLarge:\u003c\/strong\u003e 2\" long, 1 3\/4\" wide, 1 3\/4\" tall - Glossy Finish (Different Style)\u003cbr\u003e\u003cbr\u003eThis listing is for a Frog Mold. We offer this mold in the 4 sizes shown above. This frog would be so cute stand alone or would also make a great addition to your tray or dish. The NEW large size frog mold is a little different style from the other 3 and has more room for flowers or inclusions.\u003cbr\u003e\u003cbr\u003ePlease note the different finishes shown above for each mold.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003ePhotos and Resin Work done by @mlcresindesigns\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Mini","offer_id":43764699693281,"sku":"FROGMINI","price":15.0,"currency_code":"USD","in_stock":true},{"title":"Small","offer_id":43764699726049,"sku":"FROGSMALL","price":17.0,"currency_code":"USD","in_stock":true},{"title":"Medium","offer_id":43764699758817,"sku":"FROG","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":44009447456993,"sku":"FROGLARGE","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/frog_shopify.png?v=1754685847"},{"product_id":"bowl-silicone-mold-for-resin-4-x-1-5","title":"BOWL Silicone Mold for Resin | 4\" x 1.5\" |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBowl Height: 1 1\/2\"\u003cbr\u003eInside Depth: 1 1\/8\"\u003cbr\u003eDiameter: 3 7\/8\"\u003cbr\u003eWall Thickness: 3\/16\"\u003cbr\u003e\u003cbr\u003eThis listing is for a Bowl Silicone Mold for Resin.\u003cbr\u003e\u003cbr\u003eNOTE: This mold is not perfect. Some surface imperfections may be present.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message  and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742939123937,"sku":"BOWL","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/bowl_shopify.png?v=1741553571"},{"product_id":"cloud-tray-silicone-mold","title":"Cloud Tray Molds | 2 Styles | Cloud Mold for Resin","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eFlat Bottom Cloud: 6\" x 10\"\u003cbr\u003ePuffy Cloud: 7\" x 10\"\u003c\/p\u003e\n\u003cp\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003cbr\u003e\u003cbr\u003eThis listing is for a silicone mold to create a cloud rolling tray. We offer 2 Styles.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cure. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Puffy Cloud","offer_id":42771506921697,"sku":"PUFFCLOUDTRAY-72","price":59.99,"currency_code":"USD","in_stock":true},{"title":"Flat Cloud","offer_id":42771507118305,"sku":"FLATCLOUDTRAY-72","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/cloud_tray_shopify.png?v=1741395350"},{"product_id":"bookmark-silicone-mold","title":"Bookmark Silicone Mold | 4 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003eLength: 8\" Square Corners\u003cbr\u003eWidth: 1 1\/2\"\u003cbr\u003eThickness: 1\/8\"\u003cbr\u003e\u003cbr\u003eLength: 8\" Square Corners\u003cbr\u003eWidth: 1 1\/2\"\u003cbr\u003eThickness: 1\/4\"\u003c\/p\u003e\n\u003cp\u003eLength: 5 1\/4\" Square Corners\u003cbr\u003eWidth: 1 1\/4\"\u003cbr\u003eThickness:  1\/4\"\u003cbr\u003e\u003cbr\u003eLength: 5 1\/4\" Rounded Top \u0026amp; Bottom \u003cbr\u003eWidth: 1 1\/4\"\u003cbr\u003eThickness: 1\/4\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Bookmark Mold! It comes in 2 length options, 2 thickness options and 2 shapes.\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eResin work by @artworkbyjennyshlemon\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"8\" Long \u0026 1\/8\" Thick","offer_id":46548630765793,"sku":"BOOKMARK1\/8-10","price":9.0,"currency_code":"USD","in_stock":true},{"title":"8\" Long \u0026 1\/4\" Thick","offer_id":46548630798561,"sku":"BOOKMARK1\/4-9","price":12.5,"currency_code":"USD","in_stock":true},{"title":"5 1\/4\" Long \u0026 1\/4\" Thick - Square Corners","offer_id":47483187822817,"sku":"BOOKMARK5.25SQUARE-9","price":10.0,"currency_code":"USD","in_stock":true},{"title":"5 1\/4\" Long \u0026 1\/4\" Thick - Rounded","offer_id":47483187855585,"sku":"BOOKMARK5.25ROUND-9","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_85317b94-a99b-4e14-a1a7-43b7b8cd7126.png?v=1763587978"},{"product_id":"star-ashtray-silicone-mold-for-resin","title":"Star Ashtray Silicone Mold for Resin","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eHeight: 5\"\u003cbr\u003eWidth: 3\"\u003cbr\u003eDepth: 1\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to create a Star Ashtray. The final product comes out completely shiny.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742941352161,"sku":"STARASH","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/star_ashtray_shopify.png?v=1753800986"},{"product_id":"moon-flat-shiny-silicone-mold-for-resin-crafting-wall-hanging-coaster-mould-shiney","title":"Moon FLAT Mold | 6\"x8\", 8\"x10\" | Flat Molds","description":"\u003cp\u003eDIMENSIONS:\u003cbr\u003e\u003cbr\u003eMedium: 6\" x 8\"\u003cbr\u003eLarge: 8\" x 10\"\u003cbr\u003eDepth: 3\/8\"\u003cbr\u003e\u003cbr\u003eThis listing is for a silicone mold to create a Moon Flat mold. These flats are perfect for wall hangings anything else you can think of!\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Medium - 6x8","offer_id":42742941384929,"sku":"MOON68FLAT-49","price":27.0,"currency_code":"USD","in_stock":true},{"title":"Large - 8x10","offer_id":42742941417697,"sku":"MOON810FLAT-49","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/moon_flat_shopify.png?v=1740694956"},{"product_id":"pot-leaf-silicone-tray-mold-sizes-5-5-8-10-rolling-tray-mold","title":"Pot Leaf Tray Mold | Sizes - 5.5\", 8\", 10\" | Weed Tray Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSION\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSizes: 5.5\", 8\", 10\"\u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003cbr\u003e\u003cbr\u003eThis listing is for a Pot Leaf Tray Mold. This Leaf Tray Mold comes in 3 sizes. Small is 5.5\", Medium is 8\" and Large is 10\" It is approximately 5\/8\" deep. The base is 1\/4\" thick and the walls are 3\/8\" thick. \u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"6”","offer_id":42742942531809,"sku":"WEED6-97","price":29.99,"currency_code":"USD","in_stock":true},{"title":"8”","offer_id":42742942564577,"sku":"WEED8-100","price":44.99,"currency_code":"USD","in_stock":true},{"title":"10”","offer_id":42742942597345,"sku":"WEED10-100","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/weed_tray_shopify.png?v=1741399800"},{"product_id":"heart-keychain-mold-1-75x1-75x-25-hair-clip-mold-magnet-mold","title":"Heart Keychain Mold | 1.75\"x1.75\"x.25\" | Hair Clip Mold, Magnet Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeight: 1 3\/4”\u003c\/p\u003e\n\u003cp\u003eWidth at widest point: 1 3\/4”\u003c\/p\u003e\n\u003cp\u003eDepth: 1\/4”\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a silicone mold to create a heart used for magnets, hair clips or keychains. Each mold comes with 6 cavities allowing you to create more at a time.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742944334049,"sku":"HRTGRIP-23","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Heart_grip.png?v=1760131127"},{"product_id":"tooth-brush-holder-shiny-silicone-mold-for-resin-concrete-jesmonite-cement-crafting-bathroom-accessories-home-decor","title":"Toothbrush Holder Mold","description":"This listing is fora Toothbrush Holder. This holder has spots to hold 3 toothbrushes. The sides of the holder are large enough to put inclusions such as flowers or foils in your resin for a beautiful touch. The base is 3 1\/4\" x 5\" and 1\/2\" deep. The angled side pieces are 2 1\/4\" wide at the bottom and tapers to 1 3\/8\" at the top and are 1\/4\" thick. The top piece is 5\" x 1 1\/2\" and is 1\/4\" thick. The height of the assembled holder is 4 1\/4\". This is a great decor piece for your bathroom. This mold is perfect to use with resin, concrete or jesmonite.\u003cbr\u003e Please note the base of this come out where shiny surface is the bottom of the piece and may require doming to get desired affects.\u003cbr\u003e \u003cbr\u003e Please message us with any questions you may have regarding this mold.\u003cbr\u003e \u003cbr\u003e **Please note this listing is for the silicone mold ONLY. \u003cbr\u003e \u003cbr\u003e All molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e \u003cbr\u003e Our Smoothon Mold Star silicone molds cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e \u003cbr\u003e SILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e \u003cbr\u003e • DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e • Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e • USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e • Make sure the resin is fully. Uncured resin may rip the mold.\u003cbr\u003e • Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e • Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e • All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e • If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e \u003cbr\u003e PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742944563425,"sku":"TOOTH-6","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/products\/Copyofdivideddishorganizer.png?v=1656100496"},{"product_id":"organizer-tray-silicone-mold-rolling-tray-mold-rectangle-tray-mold","title":"Organizer Tray Mold | 6\" x 8\" | Divided Tray Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSizes: 6\" x 8\"\u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003c\/p\u003e\n\u003cp\u003eCircle Diameter: Approx. 3\"\u003cbr\u003e\u003cbr\u003eThis listing is for a Organizer Tray Mold. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742944727265,"sku":"RECORG68","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/organizer_tray_shopify.png?v=1741551094"},{"product_id":"square-coaster-mold-4-inch-coaster-mold","title":"Square Coaster Mold, 4 inch Coaster Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003eLENGTH: 4\"\u003cbr\u003eWIDTH: 4\"\u003cbr\u003eDEPTH: 1\/2\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Square Coaster Mold!  This mold has smooth and glossy sides.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742948102369,"sku":"SQUARECOASTER","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/square_coaster_shopify.png?v=1760114994"},{"product_id":"christmas-ornaments-with-etched-phrases-shiny-silicone-mold-for-resin-crafting","title":"Ornament Silicone Molds, 11 Phrases, Christmas Ornament Molds","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeight: 5\"\u003c\/p\u003e\n\u003cp\u003eCircle Portion: 4\"\u003c\/p\u003e\n\u003cp\u003eDepth: 3\/8\" \u003c\/p\u003e\n\u003cp\u003eThis listing is for a wide variety of Ornament Silicone Molds! There are 11 unique Christmas phrases creatively etched on these ornaments. Choose the ones you like or buy all 11 at a nice discount. \u003cbr\u003eWe offer the following phrases on the ornaments:\u003cbr\u003e\u003cbr\u003e(A) Tis The Season to be Jolly\u003cbr\u003e(B) Peace on Earth\u003cbr\u003e(C) Merry and Bright\u003cbr\u003e(D) Home Sweet Home\u003cbr\u003e(E) Merry Christmas Y'All\u003cbr\u003e(F) Believe in the Magic of Christmas\u003cbr\u003e(G) Deck the Halls\u003cbr\u003e(H) Meet Me Under the Mistletoe\u003cbr\u003e(I) Have Yourself A Merry Little Christmas\u003cbr\u003e(J) It's The Most Wonderful Time of the Year\u003cbr\u003e(K)Joy to the World\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"(A) Season ToBeJolly","offer_id":42742961275105,"sku":"JOLLYORN-A","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(B) Peace on Earth","offer_id":42742961307873,"sku":"PEACEORN-B","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(C) Merry \u0026 Bright","offer_id":42742961340641,"sku":"BRIGHTORN-C","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(D) Home Sweet Home","offer_id":42742961373409,"sku":"HOMEORN-D","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(E) Christmas YAll","offer_id":42742961406177,"sku":"XMASYALLORN-E","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(F) Believe in Magic","offer_id":42742961438945,"sku":"MAGICORN-F","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(G) Deck the Halls","offer_id":42742961471713,"sku":"DECKORN-G","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(H) Meet Mistletoe","offer_id":42742961504481,"sku":"MISTLETOEORN-H","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(I) Little Christmas","offer_id":42742961537249,"sku":"LITTLEORN-I","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(J) Wonderful Time","offer_id":42742961570017,"sku":"YEARORN-J","price":12.5,"currency_code":"USD","in_stock":true},{"title":"(K) Joy to the World","offer_id":42742961602785,"sku":"JOYORN-K","price":12.5,"currency_code":"USD","in_stock":true},{"title":"Set of 11 Ornaments","offer_id":42742961635553,"sku":"SET11ORN","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/ornaments_11_shopify.png?v=1740761645"},{"product_id":"mouse-mold-3d-resin-mold","title":"Mouse Mold, 3D Resin Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eHeight: 1\"\u003cbr\u003eWidth: 1\"\u003cbr\u003eLength: 1.5\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to make this cute little 3D Mouse. \u003cbr\u003e\u003cbr\u003eThis listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742961864929,"sku":"3DMOUSE","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/mouse_shopify.png?v=1754684248"},{"product_id":"octagon-tray-silicone-mold-sizes-5-and-7","title":"Octagon Tray Mold | Sizes - 5\" and 7\" |","description":"\u003cp\u003e~DIMENSIONS~\u003cbr\u003e\u003cbr\u003eSmall: 5\" x 5\" \u003cbr\u003eMedium: 7\" x 7\" \u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003cbr\u003e\u003cbr\u003eThis listing is for an Octagon Tray Mold. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 5\" x 5\"","offer_id":42742966255841,"sku":"OCT5","price":29.99,"currency_code":"USD","in_stock":true},{"title":"Medium - 7\" x 7\"","offer_id":42742966288609,"sku":"OCT7","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/octagon_tray_shopify.png?v=1741550071"},{"product_id":"coffin-flat-super-shiny-silicone-mold-for-resin-crafting-wall-decor-wall-hanging-fall-halloween-silicon-mould-shiney","title":"Coffin FLAT Mold | 4\"x7\", 5\"x9\" | Spooky Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSmall: 4\" x 7\" \u003cbr\u003eMedium: 5\" x 9\"\u003cbr\u003eDepth: 3\/8\"\u003cbr\u003e\u003cbr\u003eSurface Finish: Smooth\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a silicone mold to create a coffin flat. These flats are perfect for wall hangings, home decor, Halloween or anything else you can think of!\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 4\"x7\"","offer_id":42742967140577,"sku":"COFFLAT47-48","price":16.0,"currency_code":"USD","in_stock":true},{"title":"Medium - 5\"x9\"","offer_id":42742967173345,"sku":"COFFLAT59-48","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/coffin_flat_shopify.png?v=1740692959"},{"product_id":"irregular-tray-silicone-mold","title":"Irregular Tray Silicone Mold, Tray Mold | 8.25\" X 4.25\" | Polygon Tray Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003eLength: 8.25\" \u003cbr\u003eWidth: 4.25\" \u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis listing is for an irregular tray mold in a polygon shape. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message  and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742967238881,"sku":"POLYTRAY","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/irregular_tray_shopify.png?v=1741552020"},{"product_id":"easel-stand-shiny-silicone-mold-for-resin-crafting-picture-stand-silicon-mould-shiney","title":"Easel Stand Silicone Mold for Resin | 7\" x7\" |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eLength: 7\"\u003cbr\u003eWidth: 7\" when assembled\u003cbr\u003eDeep: 1\/4\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to create an Easel Stand. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742967566561,"sku":"LGEZL-4","price":27.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/easel_shopify.png?v=1740764243"},{"product_id":"ring-holder-mold-elephant-ring-holder-mold","title":"Ring Holder Mold, Elephant Ring Holder Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003eTall: 4.5\"\u003cbr\u003eLength: 2\"\u003cbr\u003eWidth: 1\"\u003cbr\u003eSuper Glossy Finish - High Quality\u003cbr\u003e\u003cbr\u003eThis listing is for an Elephant Ring Holder Mold. \u003cbr\u003e\u003cbr\u003ePlease note the elephant mold comes with one split down the side for easy demolding. The split is easy to seal. Use the rubber bands supplied to align and seal the split before pouring your resin.\u003cbr\u003e\u003cbr\u003eThis listing is for the silicone mold ONLY.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eBlack Elephant Resin Piece done by @craftycatgifts13\u003cbr\u003e\u003cbr\u003eClear Resin Piece done by @Mishy1971\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742969041121,"sku":"ELEPHANTRING","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/elephant_RING_HOLDER.png?v=1760711306"},{"product_id":"anchor-dish-silicone-mold-trinket-dish-mold","title":"Anchor Dish Silicone Mold, Trinket Dish Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e3.5\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 2.75\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .75\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to make an anchor shaped dish. What is great about this dish are the embedded anchor and rope lines on the dish to give it a realistic appearance.  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742969434337,"sku":"ANCH","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/anchor_mold_shopify.png?v=1762040537"},{"product_id":"soap-dish-silicone-mold","title":"Soap Dish Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e4.5\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 3.5\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .5\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Soap Dish Mold. This mold can be used with concrete, jesmonite, aquaresin and resin. The height of the outside rim is a 1\/2\". It has a rim on 3 sides leaving the 4th side to be a water run off edge offering drainage. This also has 8 ridges on the inside to lift the soap away from the water. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742969630945,"sku":"SOAPDISH","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/soap_Dish_shopify.png?v=1762039953"},{"product_id":"shell-dish-silicone-mold","title":"Shell Dish Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH:\u003c\/b\u003e 3\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 2.75\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .75\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to make a shell shaped dish. What is great about this dish are the embedded ridge lines on the shell to give it a realistic appearance.  \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742969827553,"sku":"SMSHL","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Brown_shell_Dish_shopify.png?v=1762039378"},{"product_id":"round-silicone-mold-4-x-2","title":"Round Silicone Mold | 4\" x 2\" |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDiameter: 4\"\u003cbr\u003eDepth: 2\"\u003cbr\u003e\u003cbr\u003eThis listing is for a Round Mold that is 4\" in diameter and 2\" deep. Please message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003cbr\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742969893089,"sku":"CIRC4X2","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/round_4x2_shopify.png?v=1760119635"},{"product_id":"jewelry-dish-silicone-mold-for-resin-crafting-trinket-dish","title":"Jewelry Dish Silicone Mold for Resin Crafting, Trinket Dish","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e5 1\/8\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 5 1\/8\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .75\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to create a beautiful resin dish. Along the inside of the rim approximately 1\/2\" apart are ridge lines and along the outside of the rim are dots that slightly protrude. (Please refer to photo) \u003cbr\u003e\u003cbr\u003e**Please note that the base of the dish has no design. The base of the dish is smooth. The picture of the dish in the mold shows a criss cross design and again this is NOT part of the mold.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742970220769,"sku":"CLRDISH","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/jewelry_Dish_shopify.png?v=1762032339"},{"product_id":"large-rectangle-mold-14-x-9-x-5-ultra-quality-molds-serving-tray-mold-wedding-flower-mold","title":"14” x 9” x 1\/2” Large Rectangle Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eLength: 14\"\u003cbr data-mce-fragment=\"1\"\u003eWidth: 9\"\u003cbr data-mce-fragment=\"1\"\u003eThickness: 1\/2\"\u003cbr data-mce-fragment=\"1\"\u003e1\/4\" Radius Corners\u003cbr data-mce-fragment=\"1\"\u003eULTRA QUALITY Glossy\/Smooth\/Shiny Top + Sides\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003eOur Smoothon Mold Star silicone molds cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42892466749665,"sku":"RECFLAT14X9X1\/2","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/C8878BF3-371F-446F-B28B-3E64DD5C79A4.png?v=1734789610"},{"product_id":"pregnant-torso-body-shape-mold-for-resin","title":"Pregnant Torso Body Shape Mold for Resin","description":"\u003cp\u003e\u003cstrong\u003eSIZE AVAILABLE:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4\" Tall\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to make a Pregnant torso body shape.  This is currently available in 1 size. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742970810593,"sku":"PREGGOD4","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Pregnant_torso_mold_shopify.png?v=1762126859"},{"product_id":"adorable-dog-mold-sculpt-3d-silicone-mold-for-resin-crafting-shiny-shiney-silicon-mould-shiny-mold-glossy","title":"Dog Mold for Resin | 5 Shapes | Dog Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003eSmall:  1\/2\" Tall and 1\" Wide\u003cbr\u003eMedium: 1\" Tall and 1.5\" Wide\u003cbr\u003eLarge: Approx. 2\" Tall and 1\" Wide\u003cbr\u003eSitting Dog XL: 3.25\" Long x 2\" Wide x 3.5\" Tall\u003cbr\u003eLaying Down Dog XL: 4\" Long x 2\" Wide x 1.5\" Tall\u003c\/p\u003e\n\u003cp\u003eThis listing is for 3D Dog Molds.  They come in a variety of shapes.  The XL sizes would be perfect for memorial or remembrance pieces as they are large enough to include fur or other items.\u003c\/p\u003e\n\u003cp\u003ePlease note the Medium, Large and Sitting Dog XL Sized mold comes with a split down the side for easy demolding.  Use the rubber bands supplied to align and seal the split before pouring your resin.\u003c\/p\u003e\n\u003cp\u003eResin work done by @mlcresindesigns\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small","offer_id":44808181219553,"sku":"DOGSMALL","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Medium","offer_id":44808181252321,"sku":"DOGMED","price":14.0,"currency_code":"USD","in_stock":true},{"title":"Large","offer_id":44808181285089,"sku":"DOGLARGE","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Sitting Dog XL","offer_id":45568903708897,"sku":"SITDOGXL","price":50.0,"currency_code":"USD","in_stock":true},{"title":"Lay Dog XL","offer_id":45568905380065,"sku":"LAYDOGXL","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_d45316f2-da8c-4fd1-ad79-f9d42303360a.png?v=1741213277"},{"product_id":"frog-silicone-mold-yoga-mold-for-resin","title":"Frog Silicone Mold, Yoga Mold for Resin","description":"\u003cp\u003eThis listing is for a shiny silicone mold to make this Meditating Yoga Frog. This piece is approximately 4.5\" tall, 1\" wide and 1 1\/3\" tall. \u003cbr\u003e\u003cbr\u003eThis listing is for the silicone mold ONLY. The frog is shown in the picture only to give you an idea of the finished piece.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742971302113,"sku":"YOGAFROG","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/yoga_frog_shopify.png?v=1761513776"},{"product_id":"organizer-dish-with-2-dividers-shiny-silicone-mold-for-resin-crafting-key-tray-coin-dish-jewelry-holder-ring-dish-silicon-mould","title":"Organizer Dish with 2 Dividers Silicone Mold | 6\" x 2.5\" |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLength: 6\"\u003c\/p\u003e\n\u003cp\u003eWidth: 2 3\/8\"\u003c\/p\u003e\n\u003cp\u003eDeep: 3\/4\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to create a beautiful rectangle shaped organizer dish with 3 compartments.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742971793633,"sku":"ORG3","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/divided_dish_shopify.png?v=1741554217"},{"product_id":"4-x-4-x-2-square-silicone-mold","title":"4”x 4”x 2” Square Silicone Mold","description":"\u003cp\u003eFINAL CAST DIMENSIONS\u003cbr\u003e\u003cbr\u003eLength: 4\"\u003cbr\u003eWidth: 4\"\u003cbr\u003eThickness: 2\"\u003cbr\u003eSharp Corners\u003cbr\u003e\u003cbr\u003eGlossy\/Smooth\/Shiny Top + Sides\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a Square Silicone Mold. The size of this square is 4\"x4\" and it's 2\" deep. This mold is perfect for encapsulating a variety of items including flowers.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742972023009,"sku":"SQ4X4X2","price":40.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/90408EB6-441A-4D2E-BE5A-4B20F8751C3A.png?v=1735047347"},{"product_id":"rectangle-agate-geode-flat-platter-shiny-silicone-mold-for-resin-crafting-wall-hanging-mould-shiney","title":"Geode FLAT Silicone Mold | 3 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e4\" X 6\"\u003cbr\u003e6\" X 8\"\u003cbr\u003e10\" X 16\"\u003cbr\u003eDEPTH: 3\/8\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis listing is for a silicone mold to create a Geode Rectangle Flat mold. We offer the 3\/8\" depth in 3 different sizes. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured.  Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4” x 6”","offer_id":46204773695713,"sku":"GEOFLAT46-54","price":22.0,"currency_code":"USD","in_stock":true},{"title":"6” x 8”","offer_id":46204773728481,"sku":"GEOFLAT68-54","price":28.0,"currency_code":"USD","in_stock":true},{"title":"10” x 16”","offer_id":46204773761249,"sku":"GEOFLAT1016-47","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/geode_flat_shopify.png?v=1740759945"},{"product_id":"butterfly-tray-silicone-mold-sizes-6x9-7x11","title":"Butterfly Tray Silicone Mold | Sizes - 6\"x9\", 7\"x11\" |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSmall: 6\" x 9\"\u003cbr\u003eMedium: 7\" x 11\"\u003cbr\u003eRim Height: 3\/8\"\u003cbr\u003eBase Height: 1\/4\"\u003cbr\u003eOverall Height: 5\/8\"\u003cbr\u003e\u003cbr\u003eThis listing is for a silicone mold to create a butterfly shaped tray.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Small - 6x9","offer_id":42742972940513,"sku":"BUTFLY69","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Medium - 7x11","offer_id":42742973006049,"sku":"BUTFLY711","price":77.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/butterfly_tray_shopify.png?v=1741394509"},{"product_id":"4x4x1-square-coaster-silicone-mold","title":"4\"x4\"x1\" Square Coaster Silicone Mold","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cbr\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eLength: 4\"\u003cbr\u003eWidth: 4\"\u003cbr\u003eThickness: 1\"\u003cbr\u003eSharp Corners\u003cbr\u003eGlossy\/Smooth\/Shiny Top + Sides\u003cbr\u003e\u003cbr\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message  and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742973268193,"sku":"SQ4X4X1","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/4x4x1_coaster.png?v=1753299132"},{"product_id":"business-card-holder-shiny-silicone-mold-for-resin-crafting-rolling-tray-coin-dish-jewelry-holder-ring-dish-silicon-mould-shiney","title":"Business Card Holder Mold, Card Holder Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e3.25” Diameter\u003c\/p\u003e\n\u003cp\u003e1.25” Deep\u003c\/p\u003e\n\u003cp\u003eThis listing is for a business card holder mold. It is a faceted mold. \u003c\/p\u003e\n\u003cp\u003eResin work and photos by @mlcresindesigns\u003cbr\u003e \u003cbr\u003e Please message us with any questions you may have regarding this mold.\u003cbr\u003e \u003cbr\u003e This is a deep mold so please review your specific resin \"max pour depths\" to avoid exothermic reactions which will shorten the lifespan of your mold.\u003cbr\u003e \u003cbr\u003e **Please note this listing is for the silicone mold ONLY. \u003cbr\u003e \u003cbr\u003e All molds are handmade and inspected before shipping.\u003cbr\u003e \u003cbr\u003e Our Smoothon Mold Star silicone molds cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e \u003cbr\u003e SILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e \u003cbr\u003e • DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e • Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e • USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e • Make sure the resin is fully. Uncured resin may rip the mold.\u003cbr\u003e • Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e • Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e • All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e • If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e \u003cbr\u003e PLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742973399265,"sku":"BIZHOLDER","price":33.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/8CA28E7B-A88C-4B38-9881-AC218F49DCAF.png?v=1739212054"},{"product_id":"coaster-mold-set-ghost-mold-coasters-with-holder-mold-halloween-mold","title":"Ghost Coaster Mold Set, Halloween Mold, Spooky Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eLength: 5\"\u003cbr\u003eWidth: 5\"\u003cbr\u003eDeep: 1\/4\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Ghost Coaster Mold Set with a stand (AKA Ghosters)! This set comes with 4 ghost molds and an oval tray stand with slots for when you want to display or are not using your coasters. The ghosts come in two different styles so all four aren't the same. \u003c\/p\u003e\n\u003cp\u003eThe image on this coaster is engraved which means it will come out matte. Which is the 2 eyes and mouth on the ghost. The image will also be recessed into your resin piece upon de-molding which will allow you to paint it or leave it be.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742975922401,"sku":"GHOSTCSTR-13","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/ghost_coasters_shopify_1.png?v=1759935190"},{"product_id":"gecko-lizard-3d-silicone-mold-for-resin","title":"Gecko\/Lizard 3D Silicone Mold for Resin","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003eLength: 3 1\/2\"\u003cbr\u003eWidth: 2\"\u003cbr\u003eHeight: 1\/2\"\u003cbr\u003e\u003cstrong\u003eSurface Finish\u003c\/strong\u003e: Smooth \u0026amp; Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to make this cute little 3D gecko\/lizard. The detail on this gecko makes it so amazing with the little dots for his eyes and protruding dots\/bumps along his body. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis listing is for the silicone mold ONLY. The gecko shown in the picture is only to give you an idea of the finished piece.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742976708833,"sku":"GECKO","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_9207834b-37fe-4cff-8a08-bbfb96a16fb6.png?v=1767480728"},{"product_id":"coaster-mold-set-pot-leaf-mold-coasters-with-holder-mold","title":"Pot Leaf Coaster Mold Set | 4\"x 5\" |  Weed Coasters with Holder Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 4\"\u003cbr\u003eWidth: 5\"\u003cbr\u003eDeep: 1\/4\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to create a Weed Leaf Coaster Set with a stand. This set comes with 4 Weed Leaf Cavities in 1 mold and an oval tray stand with slots for when you want to display or are not using your coasters.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eS\u003cstrong\u003eILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742976938209,"sku":"WEEDCSTR-19","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/pot_leaf_coaster_shopify_3d005b45-4945-45af-b4e8-1b9ce01b4f44.png?v=1759935067"},{"product_id":"apple-mold-3d-resin-molds-teacher-mold","title":"Apple Mold, 3D Resin Molds, Teacher Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApproximately 3” in diameter\u003c\/p\u003e\n\u003cp\u003eApproximately 3” Tall\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to make a 3D apple with stem. \u003cbr\u003e\u003cbr\u003eThis is a DEEP mold. Please check your resin's maximum thickness to avoid an exothermic reaction.\u003cbr\u003e\u003cbr\u003eThe apple mold comes presplit to aid in demolding of your resin piece. Use the rubber band provided to align and seal the split before pouring your resin.\u003c\/p\u003e\n\u003cp\u003eResin work done by @mlcresindesigns\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for the silicone mold ONLY. The apple shown in the picture is only to give you an idea of the finished piece.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742977233121,"sku":"APL3D","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/apple_3d_mold_shopify.png?v=1753801615"},{"product_id":"angel-silicone-mold","title":"Angel Silicone Mold","description":"\u003cdiv\u003e\n\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eHeight: 2\"\u003cbr\u003eWidth: 1 1\/4\"\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003eThis listing is for an Angel Mold. \u003cbr\u003e\u003cbr\u003ePlease note this mold comes with a split down the side for easy demolding. Use the rubber bands supplied to seal the split before pouring your resin.\u003cbr\u003e\u003cbr\u003eThis listing is for the silicone mold ONLY. The angel is shown in the picture only to give you an idea of the finished piece.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur Smoothon Mold Star silicone molds cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fareheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of \u003cbr\u003ealcohol over the resin.\u003cbr\u003e• Make sure the resin is fully. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742978117857,"sku":"ANGEL","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/angel_3d_shopify.png?v=1754686869"},{"product_id":"sphere-faceted-tealight-candle-holder-shiny-silicone-mold","title":"Tealight Candle Holder Mold, Tea Light Holder Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDiameter: 4\"\u003c\/p\u003e\n\u003cp\u003eDepth: 2\"\u003c\/p\u003e\n\u003cp\u003eSurface Finish: Glossy and Faceted\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Tealight Candle Holder Mold. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003eThis is a deep mold, please review your resin max pour depth to avoid exothermic reactions.\u003cbr\u003e\u003cbr\u003eResin work and Photos courtesy of @flofloflowery\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur Smoothon Mold Star silicone molds cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742978183393,"sku":"TEALIT","price":44.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_eb21dcc7-3709-4e42-86e1-707fbb47c0cf.png?v=1736645582"},{"product_id":"rectangle-flat-mold-for-resin-4-sizes","title":"Rectangle FLAT Mold for Resin | 4 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e4\" X 6\"\u003cbr\u003e6\" X 8\"\u003cbr\u003e8\" X 10\" \u003cbr\u003e10\" X 16\"\u003cbr\u003eDEPTH: 3\/8\"\u003c\/p\u003e\n\u003cp\u003eSurface Finish: Smooth\/Glossy\u003cbr\u003e\u003cbr\u003eThis listing is for a silicone mold to create a Rectangle Flat mold. These flats are perfect for wall hangings, signs, Serving Trays, or anything else you can think of! \u003cbr\u003e\u003cbr\u003eResin done by @artworkbyjennyshlemon\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4 x 6 x 3\/8","offer_id":42742978642145,"sku":"RECFLAT46-59","price":19.99,"currency_code":"USD","in_stock":true},{"title":"6 x 8 x 3\/8","offer_id":42742978674913,"sku":"RECFLAT68-59","price":24.99,"currency_code":"USD","in_stock":true},{"title":"8 x 10 x 3\/8","offer_id":42742978707681,"sku":"RECFLAT810-50","price":29.99,"currency_code":"USD","in_stock":true},{"title":"10 x 16 x 3\/8","offer_id":42742978740449,"sku":"RECFLAT1016-45","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/rectangle_flat_shopify_1.png?v=1741019723"},{"product_id":"shamrock-coaster-mold-set-st-patricks-day","title":"Shamrock Coaster Mold Set, St. Patrick's Day","description":"\u003cdiv\u003e\n\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eLength: 4.5\"\u003cbr\u003eWidth: 4.5\"\u003cbr\u003eDeep: 1\/4\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003eThis listing is for a silicone mold to create a Shamrock shaped Coaster Set with a stand! This set comes with 4 Shamrock coaster molds and an Oval tray stand for when you want to display your coasters. This comes in 2 molds. One for the 4 coasters and one for the stand.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742979002593,"sku":"SHAMCSTR-26-11","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/shamrock_coaster_shopify_08f00bab-1f96-456d-9019-ea6495a41230.png?v=1759934826"},{"product_id":"heart-ashtray-mold-ashtray-silicone-mold-heart-molds","title":"Heart Ashtray Mold, Ashtray Silicone Mold, Heart Molds","description":"\u003cdiv\u003e\n\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eHeight: 4.5\"\u003cbr\u003eWidth: 5\"\u003cbr\u003eDepth: 1\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003eThis listing is for a Heart Ashtray Mold. The final product comes out completely shiny.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742979100897,"sku":"HEARTASH","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/heart_ashtray_shopify.png?v=1753800190"},{"product_id":"square-dish-mold-jewelry-dish-mold","title":"Square Dish Mold, Jewelry Dish Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e3.5\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 3.5\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .75\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Square Dish mold to create a Beautiful Square shaped dish. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742979363041,"sku":"SQDISH","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Square_Dish_shopify.png?v=1762038700"},{"product_id":"africa-keychain-molds-2-x2-x-25-hair-clip-molds-magnet-molds-earring-molds","title":"Africa Keychain Molds | 2”x2”x.25” | Hair Clip Molds, Magnet Molds, Earring Molds","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST\u003c\/strong\u003e \u003cstrong\u003eDIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHeight: 2\"\u003c\/p\u003e\n\u003cp\u003eWidth: 2\"\u003c\/p\u003e\n\u003cp\u003eDepth: .25\"\u003c\/p\u003e\n\u003cp\u003eSurface Finish: Smooth\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to create Africa used for magnets, keychains, hair clips or earrings.  Each mold comes with 6 cavities allowing you to create more at a time.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.S.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742982443233,"sku":"AFRICAGRIP-24","price":16.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Africa_grip.png?v=1760130348"},{"product_id":"cupcake-stand-mold-3-tier-cake-stand-mold-cake-stand-mold","title":"Cupcake Stand Mold, 3 Tier Cake Stand Mold, Cake Stand Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS WHEN ASSEMBLED:\u003c\/strong\u003e\u003cbr\u003eHeight: 14\"\u003cbr\u003eWidth: 7\"\u003cbr\u003eDepth:  1\/4\"\u003cbr\u003e\u003cstrong\u003eSurface Finish\u003c\/strong\u003e: Smooth \u0026amp; Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Cupcake Stand Mold. The size of this stand is approximately 14“tall and it's approximately 7\" wide when assembled. The thickness is 1\/4\". This stand is perfect to display your cupcakes, cakes, desserts, cookies or fruit. You can create 2 or 3 tiered trays. It's your choice. These trays are perfect for dessert displays at a wedding or for home decor in your bedroom or bathroom. The largest base tray can even be used to create a beautiful geode clock. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eResin work done by @artworkbyjennyshlemon\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e This listing is for the MOLD ONLY. Hardware is not included. Hardware is easily purchased from Amazon or other stores.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742983000289,"sku":"3TIERSTND","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_d6e0cb73-dd2a-426c-bb83-23c68020f76e.png?v=1767478034"},{"product_id":"coaster-mold-set-tree-coaster-molds-coasters-with-holder-mold-christmas-mold-holiday-molds","title":"Tree Coaster Mold Set | 5.5\" tall | Christmas Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 5.5\"\u003cbr\u003eDeep: 1\/4\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to create a Tree shaped Coaster Set with a stand! This set comes with 4 Tree Coaster molds and an Oval tray stand for when you want to display your coasters.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742983983329,"sku":"TREECSTR-11-17","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/tree_coaster_shopify_373918eb-d68c-4aa5-b5de-c59296e823a4.png?v=1759933483"},{"product_id":"trinket-dish-silicone-mold","title":"Trinket Dish Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e3.5\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 3.5\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e 1\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to make a beautiful and distinctive trinket tray. The scalloped edges give it a wonderful touch that sets it apart from the average.  This dish would make a great trinket or jewelry dish. Perfect to hold rings! It's a beautiful decorative piece.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742984278241,"sku":"BLUSCAL","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/trinket_Dish_shopify.png?v=1762031617"},{"product_id":"snowflake-coaster-mold-christmas-molds","title":"Snowflake Coaster Mold, Christmas Molds","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eLength: 4.5\"\u003cbr\u003eWidth: 4.5\"\u003cbr\u003eDeep: 1\/4\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to create a Snowflake Coaster Set with a stand! This set comes with 4 snowflake molds and an Oval tray stand for when you want to display your coasters. The snowflakes come in two different styles so all four aren't the same. \u003cbr\u003e\u003cbr\u003eThe image on this tray is engraved which means it will come out matte. The image will also be recessed into your resin piece upon de-molding. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742985195745,"sku":"SNWFLKCSTR-14","price":27.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/snowflake_coaster_shopify_a41356f8-59da-45fb-8126-a745ac1382b9.png?v=1759933301"}],"url":"https:\/\/zapp3ddesign.com\/collections\/top-sellers-silicone-resin-products.oembed?page=8","provider":"Zapp3D Design LLC","version":"1.0","type":"link"}