{"title":"Bowl and Dish Molds","description":"","products":[{"product_id":"rectangle-dish-mold-trinket-dish-mold-dish-mold-small-rectangle-tray-mold","title":"Rectangle Mold | 4”x 3” | Jewelry Dish Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLength: 4”\u003c\/p\u003e\n\u003cp\u003eWidth: 3”\u003c\/p\u003e\n\u003cp\u003eDeep: 3\/4”\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a rectangle mold to create a beautiful rectangle shaped resin dish with angled corners. PLEASE NOTE: The rooster shown on the dish is lightly etched on the mold. Other crafters say that it isn't noticeable on your finished piece.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742932275425,"sku":"ROOST","price":22.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/rooster_dish_shopify.png?v=1741554711"},{"product_id":"bowl-silicone-mold-for-resin-4-x-1-5","title":"BOWL Silicone Mold for Resin | 4\" x 1.5\" |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eBowl Height: 1 1\/2\"\u003cbr\u003eInside Depth: 1 1\/8\"\u003cbr\u003eDiameter: 3 7\/8\"\u003cbr\u003eWall Thickness: 3\/16\"\u003cbr\u003e\u003cbr\u003eThis listing is for a Bowl Silicone Mold for Resin.\u003cbr\u003e\u003cbr\u003eNOTE: This mold is not perfect. Some surface imperfections may be present.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message  and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742939123937,"sku":"BOWL","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/bowl_shopify.png?v=1741553571"},{"product_id":"star-ashtray-silicone-mold-for-resin","title":"Star Ashtray Silicone Mold for Resin","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eHeight: 5\"\u003cbr\u003eWidth: 3\"\u003cbr\u003eDepth: 1\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to create a Star Ashtray. The final product comes out completely shiny.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742941352161,"sku":"STARASH","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/star_ashtray_shopify.png?v=1753800986"},{"product_id":"starfish-mold-trinket-dish-mold","title":"Starfish Mold, Trinket Dish Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e5\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 5\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .75\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Starfish Mold or also called a Trinket Dish Mold for Resin. This is a one of a kind dish with the 3D starfish in the middle. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742967992545,"sku":"BLUSTAR","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Blue_Starfish_Dish_shopify.png?v=1762038234"},{"product_id":"anchor-dish-silicone-mold-trinket-dish-mold","title":"Anchor Dish Silicone Mold, Trinket Dish Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e3.5\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 2.75\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .75\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to make an anchor shaped dish. What is great about this dish are the embedded anchor and rope lines on the dish to give it a realistic appearance.  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742969434337,"sku":"ANCH","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/anchor_mold_shopify.png?v=1762040537"},{"product_id":"soap-dish-silicone-mold","title":"Soap Dish Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e4.5\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 3.5\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .5\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Soap Dish Mold. This mold can be used with concrete, jesmonite, aquaresin and resin. The height of the outside rim is a 1\/2\". It has a rim on 3 sides leaving the 4th side to be a water run off edge offering drainage. This also has 8 ridges on the inside to lift the soap away from the water. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742969630945,"sku":"SOAPDISH","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/soap_Dish_shopify.png?v=1762039953"},{"product_id":"shell-dish-silicone-mold","title":"Shell Dish Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH:\u003c\/b\u003e 3\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 2.75\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .75\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to make a shell shaped dish. What is great about this dish are the embedded ridge lines on the shell to give it a realistic appearance.  \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742969827553,"sku":"SMSHL","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Brown_shell_Dish_shopify.png?v=1762039378"},{"product_id":"jewelry-dish-silicone-mold-for-resin-crafting-trinket-dish","title":"Jewelry Dish Silicone Mold for Resin Crafting, Trinket Dish","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e5 1\/8\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 5 1\/8\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .75\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to create a beautiful resin dish. Along the inside of the rim approximately 1\/2\" apart are ridge lines and along the outside of the rim are dots that slightly protrude. (Please refer to photo) \u003cbr\u003e\u003cbr\u003e**Please note that the base of the dish has no design. The base of the dish is smooth. The picture of the dish in the mold shows a criss cross design and again this is NOT part of the mold.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742970220769,"sku":"CLRDISH","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/jewelry_Dish_shopify.png?v=1762032339"},{"product_id":"organizer-dish-with-2-dividers-shiny-silicone-mold-for-resin-crafting-key-tray-coin-dish-jewelry-holder-ring-dish-silicon-mould","title":"Organizer Dish with 2 Dividers Silicone Mold | 6\" x 2.5\" |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLength: 6\"\u003c\/p\u003e\n\u003cp\u003eWidth: 2 3\/8\"\u003c\/p\u003e\n\u003cp\u003eDeep: 3\/4\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to create a beautiful rectangle shaped organizer dish with 3 compartments.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742971793633,"sku":"ORG3","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/divided_dish_shopify.png?v=1741554217"},{"product_id":"square-dish-mold-jewelry-dish-mold","title":"Square Dish Mold, Jewelry Dish Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e3.5\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 3.5\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .75\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Square Dish mold to create a Beautiful Square shaped dish. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742979363041,"sku":"SQDISH","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Square_Dish_shopify.png?v=1762038700"},{"product_id":"trinket-dish-silicone-mold","title":"Trinket Dish Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e3.5\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 3.5\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e 1\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to make a beautiful and distinctive trinket tray. The scalloped edges give it a wonderful touch that sets it apart from the average.  This dish would make a great trinket or jewelry dish. Perfect to hold rings! It's a beautiful decorative piece.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742984278241,"sku":"BLUSCAL","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/trinket_Dish_shopify.png?v=1762031617"},{"product_id":"large-shell-dish-silicone-mold-for-resin-crafting","title":"Large Shell Dish Silicone Mold for Resin Crafting","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e6\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 6\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .75\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a  silicone mold to make a large shell shaped dish. What is great about this dish are the embedded ridge lines on the shell to give it a realistic appearance.  This dish would make a great soap dish, trinket or jewelry dish. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42742986539233,"sku":"LGSHL","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/large_shell_Dish_shopify.png?v=1762030869"},{"product_id":"mermaid-tail-dish-silicone-mold","title":"Mermaid Dish Silicone Mold, Mermaid Tail Dish Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e6.5\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing is for a shiny silicone mold to make a beautiful mermaid tail shaped dish. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42743011737825,"sku":"MERM","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Mermaid_Dish_shopify.png?v=1762029023"},{"product_id":"flower-petal-dish-with-butterfly-silicone-mold-for-resin-crafting-ring-dish-trinket-tray-soap-dish-jewelry-holder-silicon-mould","title":"Flower Petal Dish with Butterfly Silicone Mold for Resin Crafting","description":"\u003cp\u003eThis listing is for a silicone mold to create this beautiful flower petal shaped dish with raised 3D Butterly. Lots of possibilities with this dish. The base of the dish (the flower petal) is NOT a shiny finish. This is a matte finish. ONLY the butterfly is glossy. The width of this dish is 4.5\". The height is approximately .5\" with the butterfly section raised another .5\".\u003cbr\u003e\u003cbr\u003eNOTE: The butterfly portion of the mold is slightly torn in order to aid in the removal of the butterly.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003eOur Smoothon Mold Star silicone molds cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• Plastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e• All torso molds come pre-split to allow for easy demolding of your resin piece. Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42743016751329,"sku":"FLWRBUT","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/flower_Butterfly_dish_shopify.png?v=1761234103"},{"product_id":"seahorse-trinket-dish-silicone-mold","title":"Seahorse Trinket Dish Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLength: 8.75”\u003c\/p\u003e\n\u003cp\u003eWidth: 4”\u003c\/p\u003e\n\u003cp\u003eDepth: .75”\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a silicone mold to create this beautiful and unique Seahorse dish.  \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42743021371617,"sku":"SEAHORSE","price":66.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Seahorse_Dish_shopify.png?v=1762028123"},{"product_id":"starfish-dish-silicone-mold","title":"Starfish Dish Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e3.5\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 3.5\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e .75\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for a silicone mold to make a starfish shaped dish. What is great about this dish is the star etched in the center of the dish as well as protruding dots and realistic lines. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42743024550113,"sku":"BRWSTAR","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Starfish_Dish_shopify.png?v=1762027854"},{"product_id":"irregular-dish-mold-bowl-mold-trinket-dish-mold","title":"Irregular Dish Mold, Bowl Mold, Trinket Dish Mold","description":"This listing is for an Irregular Dish Mold.   This Resin Dish Mold has flower petal like edges. This dish is approximately 1 1\/2\" tall and 3 1\/4\" in diameter.  This Bowl Mold produces a beautiful resin dish.   Lots of possibilities with this dish. \u003cbr\u003e\n\u003cbr\u003e\nNOTE: This mold comes PRE-SPLIT with 2 splits.  This allows for easy demolding of your resin piece.  Use the rubber bands included to seal the split before pouring your resin.\u003cbr\u003e\n\u003cbr\u003e\nPlease message us with any questions you may have regarding this mold.\u003cbr\u003e\n\u003cbr\u003e\n**Please note this listing is for the silicone mold ONLY.  \u003cbr\u003e\n\u003cbr\u003e\nAll molds are handmade and inspected before shipping. All trays are made from stacked acrylic which may cause a line to appear in the mold. (Very minimal)\u003cbr\u003e\n\u003cbr\u003e\nOur Smoothon Mold Star silicone molds cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials.  The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade.  They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\n\u003cbr\u003e\nSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\n\u003cbr\u003e\n•\tDON’T TOUCH the inside shiny part of the mold.  This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e\n•\tUse scotch tape to gently clean the mold.  Tap the spot lightly where there are loose particles.\u003cbr\u003e\n•\tUSE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin.  It may rip the mold upon demolding your fully cured resin.  Instead try a mist of alcohol over the resin.\u003cbr\u003e\n•\tMake sure the resin is fully.  Uncured resin may rip the mold.\u003cbr\u003e\n•\tPlease follow all safety precautions when using resin.  It is very toxic.\u003cbr\u003e\n•\tPlastic Wrap\/Bag Marks on trays will go away within 48-72 hours.\u003cbr\u003e\n•\tAll torso molds come pre-split to allow for easy demolding of your resin piece.  Use the rubber bands to aid you to seal the split upon pouring.\u003cbr\u003e\n•\tIf you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\n\u003cbr\u003e\nPLEASE INSPECT MOLD PRIOR TO FIRST USE.  I DO NOT ACCEPT RETURNS OF USED MOLDS.","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42855030718689,"sku":"IRREGDISH","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/irregular_dish_shopify.png?v=1761515533"},{"product_id":"apple-dish-mold-trinket-dish-mold","title":"Apple Dish Mold, Trinket Dish Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLength \u0026amp; Width: 3.75”\u003c\/p\u003e\n\u003cp\u003eHeight:  .75”\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for an apple dish mold. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":42858619273441,"sku":"APLDISH","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/apple_dish_mold_shopify.png?v=1753801885"},{"product_id":"deep-pill-tray-mold","title":"Deep Pill Tray Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eLength: 7.5\"\u003cbr\u003eWidth: 4.5\"\u003cbr\u003eRim Width: 1\/2\"\u003cbr\u003eRim Height: 1\/2\"\u003cbr\u003eBase Height: 1\"\u003cbr\u003eOverall Height: 1.5\"\u003cbr\u003eAll Edges Rounded\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis listing is for a Deep Pill Tray Mold. All edges of this tray will be rounded giving it a softer look. You will have up to 1\" of working room underneath the face of the tray. This gives you plenty of room for your florals or any other inclusion you would like to add. Our Deep Pill Tray Molds will produce a product that is smooth and glossy on all sides!! Inside and Outside!! There will be no lines in your finished product. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eResin Work and Photos by @kanetahale\u003cbr\u003e\u003cbr\u003eFree Layout Template Included\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":44650498392289,"sku":"DEEPPILL","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Deep_pill.png?v=1753299730"},{"product_id":"deep-round-tray-mold","title":"Deep Round Tray Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDiameter: 5\"\u003cbr\u003eRim Width: 1\/2\"\u003cbr\u003eRim Height: 1\/2\"\u003cbr\u003eBase Height: 1\"\u003cbr\u003eOverall Height: 1.5\"\u003cbr\u003eAll Edges Rounded\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis listing is for a Deep Round Tray Mold. All edges of this tray are rounded giving it a softer look. You will have up to 1\" of working room underneath the face of the tray. This gives you plenty of room for your florals or any other inclusion you would like to add. Our Deep Circle Tray Molds will produce a product that is smooth and glossy on all sides!! Inside and Out!! There will be no lines in your finished product. This is an ULTRA QUALITY MOLD!!\u003cbr\u003e\u003cbr\u003eFree Layout Template Included\u003c\/p\u003e\n\u003cp\u003eResin work and video by @erinssofabulous\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":44708720607457,"sku":"DEEPROUNDTRAY","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/Deep_round_tray.png?v=1753299940"},{"product_id":"oval-mold-trinket-dish-mold-oval-dish-mold","title":"Oval Dish Mold, Trinket Dish Mold, Oval Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLENGTH: \u003c\/b\u003e6\"\u003cbr\u003e\u003cstrong\u003eWIDTH:\u003c\/strong\u003e 4\"\u003cbr\u003e\u003cstrong\u003eDEEP:\u003c\/strong\u003e 1.25\"\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eOval Trinket Dish Silicone Mold with Decorative Ridges\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003eElevate your resin art with our \u003cstrong\u003eOval Trinket Dish Mold\u003c\/strong\u003e, designed to create elegant, functional pieces that stand out. This mold features \u003cstrong\u003edecorative outer ridges\u003c\/strong\u003e that give each finished dish a refined, sculpted look -- perfect for displaying jewelry, keys, candles, or keepsakes.\u003c\/p\u003e\n\u003cp\u003ePlease note that the design shown on the bottom of the dish will not be in your mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":47271983087841,"sku":"OVALDISH","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/files\/1_120bf755-e9b3-4d4f-9c24-368863ecab7c.png?v=1760562205"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0465\/9747\/2414\/collections\/Bowl_Dish_Molds_header.png?v=1761515411","url":"https:\/\/zapp3ddesign.com\/collections\/trinket-dish-molds.oembed","provider":"Zapp3D Design LLC","version":"1.0","type":"link"}