You are looking at mixing sticks designed to be reused when mixing resin/epoxy. The sticks are 3D printed in plastic to allow for a stiffer stick to make stirring easier. Some features to be aware of are the straight side and flat bottom. This is very key when mixing and scraping the sides and bottom of your cups to get everything thoroughly mixed. The right angle edge allows you to reach the corner of your cups to make sure everything is mixed thoroughly. Another benefit of these sticks is that the stick isn't porous like a popsicle stick. Since the plastic stick is solid, you will get less bubbles when mixing your resin! You can also use these sticks to scoop out your glitter or mica powders into your resin! The wide bottom will allow for easy scooping!
The big sticks are 7" long and the small are 4” long.
Colors come random and in an assortment.
CLEANING: You must wipe the resin off the sticks with a paper towel or cloth to make sure they can be reused. The resin WILL cure to the sticks if not cleaned before curing.
All items shown in this picture are to give you an idea of the size of the mixing stick and options of what it can be used for. The picture is NOT meant to show that you are purchasing everything in the picture.